[Armadillo:08773] 起動実行と手動実行で取得する時刻がJSTとUTCで変わる

Yamamoto email@hidden
2013年 5月 9日 (木) 15:12:56 JST


Yamamotoと申します。

現在Almaddilo460でC言語による開発を行っております。

時刻を色々と使用しているのですが、スクリプトでプログラムを起動時に自動実行させた
時と、ログインして手動で実行させたときで使用される時刻がJSTとUTCで変わっているよ
うで何故かご存知の方教えていただけませんでしょうか。

状況
1.date -s "050915002013.00" で13/5/9 15:00:00に設定
2.hwclock --systohc --utc でRTCにUTCで現在時刻を設定
  hwclock の確認で-9時間表示を確認
3.Armadillo460の電源Off->Onで再起動
  プログラム表示(gettimeofdayで取得、localtime値を表示)でUTCの日時が表示される。
4.ログインして、同じプログラムを手動実行するとJSTの日時が表示される。

----------------------- 起動実行 ---------------------------------
Doing console=ttymxc3
Linux version 2.6.26-at15 (2.6.26) (email@hidden) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #8 PREEMPT Tue Feb 12 14:40:53 JST 2013
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177
Machine: Armadillo-460
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttymxc3
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 2048 bytes)
MXC GPT timer initialized, rate = 133000000
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 108740KB available (3020K code, 221K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 480 bytes
NET: Registered protocol family 16
MXC WDOG1 Enabled
CPU is i.MX25 Revision 1.2
Clock input source is 24000000
MXC GPIO hardware
GPIO-56 autorequested
Initializing CPLD: v2
Using SDMA I.API
MXC DMA API initialized
SCSI subsystem initialized
CSPI: mxc_spi-2 probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
MXC I2C driver
MXC I2C driver
MXC I2C driver
MC34704 regulator successfully probed
mc34704 0-0054: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 17777K
usb: Host 2 host (serial) registered
usb: DR host (utmi) registered
msgmni has been set to 247
io scheduler noop registered
io scheduler cfq registered (default)
mx2fb: Unable to set clock to 0
Console: switching to colour frame buffer device 60x17
mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully.
mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully.
Serial: MXC Internal UART driver
mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
mxcintuart.3: ttymxc3 at MMIO 0x50008000 (irq = 5) is a Freescale MXC
console [ttymxc3] enabled
mxcintuart.4: ttymxc4 at MMIO 0x5002c000 (irq = 40) is a Freescale MXC
brd: module loaded
loop: module loaded
Freescale FlexCAN Driver
FEC Ethernet Driver
PPP generic driver version 2.4.2
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Driver 'sd' needs updating - please use bus_type methods
armadillo-nor: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
armadillo-nor: use default partitions(4)
Creating 4 MTD partitions on "armadillo-nor":
0x00000000-0x00020000 : "nor.bootloader"
0x00020000-0x00220000 : "nor.kernel"
0x00220000-0x01fe0000 : "nor.userland"
0x01fe0000-0x02000000 : "nor.config"
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 35, io mem 0x53ff4400
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 37, io mem 0x53ff4000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
i2c /dev entries driver
rtc-s35390a 3-0030: rtc core: registered rtc-s35390a as rtc0
i2c-gpio i2c-gpio.3: using pins 128 (SDA) and 129 (SCL, no clock stretching)
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 159 irq 9 INTERNAL DMA
Registered led device: red
Registered led device: green
Registered led device: yellow
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
i.MX ADC at 0x50030000 irq 46
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20071116 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20071116)
can: broadcast manager protocol (rev 20080415)
Static Power Management for Freescale i.MX25
input: imx_adc_ts as /devices/virtual/input/input1
i.MX ADC input touchscreen loaded.
rtc-s35390a 3-0030: setting system clock to 2013-05-09 05:54:16 UTC (1368078856)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 17777KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 128K
init started:  BusyBox v1.00 (2012.09.19-05:03+0000) multi-call binary
Starting fsck for root filesystem.
fsck 1.25 (20-Sep-2001)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram0 is mounted.
/dev/ram0: clean, 964/1152 files, 16137/17777 blocks
mmc0: new high speed SD card at address 1234
mmcblk0: mmc0:1234 SA128 121088KiB
 mmcblk0: p1
Checking root filesystem:                                       done
Remounting root rw:                                             done
Mounting proc:                                                  done
Mounting usbfs:                                                 done
Mounting sysfs:                                                 done
Cleaning up system:                                             done
Running local start scripts.
Starting udevd:                                                 done
Loading /etc/config:                                            done
Changing file permissions:                                      done
Configure /home/ftp:                                            done
Starting syslogd:                                               done
Starting klogd:                                                 done
Starting basic firewall:                                        done
Setting hostname:                                               done
Configuring network interfaces: fec: PHY @ 0x0, ID 0x0007c0f1 -- LAN8720
eth0: link down
                                                                done
Starting inetd:                                                 done
Setting at-cgi:                                                 done
Starting lighttpd:                                              done
eth0: link up, 100Mbps, full-duplex
Creating avahi.services:                                        done
Starting avahi.daemon:                                          done
Mounting ramfs /home/ftp/pub:                                   done
================= Starting Scripts. ==================
4,13/05/09 05:54:32.751|run.c:119:main(0) Start!!! =============


------------------------ 手動実行 -------------------------
[email@hidden (ttymxc3) /usr/bin/mm2]# ./run
4,13/05/09 15:10:14.053|run.c:119:main(0) Start!!! ==============

注意:確認用で手動実行は少し時間が空いてます。





armadillo メーリングリストの案内