Hermit-At v1.1.13 (armadillo9/eth) compiled at 19:25:02, Dec 10 2007 Uncompressing kernel.................................................................................Uncompressing ramdisk.................................................................................Doing noinitrd Doing root=/dev/hdc1 Doing console=ttyAM0,115200 Doing mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(userland),-(config) Linux version 2.6.12.3-a9-17 (atmark@atde) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)9CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Machine: Armadillo-9 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: noinitrd root=/dev/hdc1 console=ttyAM0,115200 mtdparts=armadillo9-nor:0x10000(bo)PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 32MB 32MB = 64MB total Memory: 55508KB available (2373K code, 582K data, 100K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 6144K NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (double precision) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Console: switching to colour frame buffer device 80x30 fb0: EP93xx frame buffer at 640x480x16 ttyAM0 at MMIO 0x808c0000 (irq = 52) is a EP93XX ttyAM1 at MMIO 0x808d0000 (irq = 54) is a EP93XX ttyAM2 at MMIO 0x808e0000 (irq = 55) is a EP93XX io scheduler noop registered io scheduler anticipatory registered NORinicom 2.2 | VT102 ؒf io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) i2c /dev entries driver i2c-armadillo9: i2c Armadillo-9 driver, (C) 2004-2007 Atmark Techno, Inc. i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2003-2005 Atmark Techno, Inc. i2c-s3531a: Device Type [S-353x0A] i2c-s3531a: i2c S-3531A/S-353X0A driver, (C) 2001-2005 Atmark Techno, Inc. Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Fixed Disk Card IDE interface [silicon] [unique] [single] [sleep] [standby] [idle] [low power] Trying to free nonexistent resource hdc: TRANSCEND, CFA DISK drive ide1 at 0xc6800000-0xc6800007,0xc680000e on irq 49 hdc: max request size: 128KiB hdc: 7831152 sectors (4009 MB) w/1KiB Cache, CHS=7769/16/63 hdc: cache flushes not supported /dev/ide/host1/bus0/target0/lun0: p1 armadillo9-nor: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 armadillo9-nor: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device armadillo9-nor parse_mtd_partitions:4 Creating 4 MTD partitions on "armadillo9-nor": 0x00000000-0x00010000 : "bootloader" 0x00010000-0x00180000 : "kernel" 0x00180000-0x007f0000 : "userland" 0x007f0000-0x00800000 : "config" ep93xxusb ep93xxusb.0: EP93xx OHCI ep93xxusb ep93xxusb.0: new USB bus registered, assigned bus number 1 ep93xxusb ep93xxusb.0: irq 56, io base 0xff020000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected usbcore: registered new driver audio drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using ep93xxusb and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usbcore: registered new driver ov511 drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 /dev/ide/host1/bus0/target0/lun0: p1 /dev/ide/host1/bus0/target0/lun0: p1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing init memory: 100K INIT: version 2.86 booting * udev requires a kernel >= 2.6.15, not started. failed! Activating swap...done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /lib/init/rw/rootdev was not cleanly unmounted, check forced. Deleted inode 130993 has zero dtime. FIXED. /lib/init/rw/rootdev: ***** REBOOT LINUX ***** /lib/init/rw/rootdev: 8128/489600 files (0.2% non-contiguous), 53149/978760 blocks fsck died with exit status 3 failed (code 3). * The file system check corrected errors on the root partition but requested that the system be restarted. * The system will be restarted in 5 seconds. Restarting system. Hermit-At v1.1.13 (armadillo9/eth) compiled at 19:25:02, Dec 10 2007 Uncompressing kernel.................................................................................Uncompressing ramdisk.................................................................................Doing noinitrd Doing root=/dev/hdc1 Doing console=ttyAM0,115200 Doing mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(userland),-(config) Linux version 2.6.12.3-a9-17 (atmark@atde) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)9CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Machine: Armadillo-9 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: noinitrd root=/dev/hdc1 console=ttyAM0,115200 mtdparts=armadillo9-nor:0x10000(bo)PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 32MB 32MB = 64MB total Memory: 55508KB available (2373K code, 582K data, 100K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 6144K NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (double precision) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Console: switching to colour frame buffer device 80x30 fb0: EP93xx frame buffer at 640x480x16 ttyAM0 at MMIO 0x808c0000 (irq = 52) is a EP93XX ttyAM1 at MMIO 0x808d0000 (irq = 54) is a EP93XX ttyAM2 at MMIO 0x808e0000 (irq = 55) is a EP93XX io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) i2c /dev entries driver i2c-armadillo9: i2c Armadillo-9 driver, (C) 2004-2007 Atmark Techno, Inc. i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2003-2005 Atmark Techno, Inc. i2c-s3531a: Device Type [S-353x0A] i2c-s3531a: i2c S-3531A/S-353X0A driver, (C) 2001-2005 Atmark Techno, Inc. Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Fixed Disk Card IDE interface [silicon] [unique] [single] [sleep] [standby] [idle] [low power] Trying to free nonexistent resource hdc: TRANSCEND, CFA DISK drive ide1 at 0xc6800000-0xc6800007,0xc680000e on irq 49 hdc: max request size: 128KiB hdc: 7831152 sectors (4009 MB) w/1KiB Cache, CHS=7769/16/63 hdc: cache flushes not supported /dev/ide/host1/bus0/target0/lun0: p1 armadillo9-nor: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 armadillo9-nor: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device armadillo9-nor parse_mtd_partitions:4 Creating 4 MTD partitions on "armadillo9-nor": 0x00000000-0x00010000 : "bootloader" 0x00010000-0x00180000 : "kernel" 0x00180000-0x007f0000 : "userland" 0x007f0000-0x00800000 : "config" ep93xxusb ep93xxusb.0: EP93xx OHCI ep93xxusb ep93xxusb.0: new USB bus registered, assigned bus number 1 ep93xxusb ep93xxusb.0: irq 56, io base 0xff020000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected usbcore: registered new driver audio drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using ep93xxusb and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usbcore: registered new driver ov511 drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 /dev/ide/host1/bus0/target0/lun0: p1 /dev/ide/host1/bus0/target0/lun0: p1 VFS: Mounted root (ext2 filesystem). Freeing init memory: 100K INIT: version 2.86 booting * udev requires a kernel >= 2.6.15, not started. failed! Activating swap...done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /lib/init/rw/rootdev: clean, 8128/489600 files, 53149/978760 blocks done. Setting the system clock.. Cleaning up ifupdown.... Loading kernel modules...FATAL: Could not load /lib/modules/2.6.12.3-a9-17/modules.dep: No such file yLoading device-mapper support. Checking file systems...fsck 1.40-WIP (14-Nov-2006) done. Setting kernel variables...done. Mounting local filesystems...done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth0/00:11:0c:02:1e:e3 Sending on LPF/eth0/00:11:0c:02:1e:e3 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.57 -- renewal in 113216 seconds. done. modprobe: FATAL: Could not load /lib/modules/2.6.12.3-a9-17/modules.dep: No such file or directory INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. * Not starting internet superserver: no services enabled. Starting OpenBSD Secure Shell server: sshd. Starting periodic command scheduler: crond. Debian GNU/Linux 4.0 debian ttyAM0 debian login: