[root@armadillo440-0 (ttymxc1) /home/ftp/pub]#
[root@armadillo440-0 (ttymxc1) /home/ftp/pub]#
[root@armadillo440-0 (ttymxc1) /home/ftp/pub]#
[root@armadillo440-0 (ttymxc1) /home/ftp/pub]# ifconfig eth1 100.0.0.1 up
[root@armadillo440-0 (ttymxc1) /home/ftp/pub]# [ARG:0x941f7a43]
[blklen:67  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0003.
*** mmc1 got interrupt: 0x00000009
*** mmc1 got interrupt: 0x00000102
[ARG:0x9c2f0001]
[blklen:128  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0003.
*** mmc1 got interrupt: 0x00000108
*** mmc1 got interrupt: 0x00000103
sdhci_send_command 0x34 is starting...
Complete sending cmd, transfer mode would be 0x341a0000.
*** mmc1 got interrupt: 0x00000101
[ARG:0x1408001c]
[blklen:28  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_FROM_DEIVCE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0013.
*** mmc1 got interrupt: 0x0000010b
[ARG:0x10088001]
[blklen:1  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_FROM_DEIVCE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0013.
*** mmc1 got interrupt: 0x0000010b
[ARG:0x90083601]
[blklen:1  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0003.
*** mmc1 got interrupt: 0x00000108
*** mmc1 got interrupt: 0x00000103
[ARG:0x90083601]
[blklen:1  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0003.
*** mmc1 got interrupt: 0x00000108
*** mmc1 got interrupt: 0x00000103
*** mmc1 got interrupt: 0x00000100
sdhci_send_command 0x34 is starting...
Complete sending cmd, transfer mode would be 0x341a0000.
*** mmc1 got interrupt: 0x00000101
[ARG:0x1408001c]
[blklen:28  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_FROM_DEIVCE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0013.
*** mmc1 got interrupt: 0x0000010b
[ARG:0x90083601]
[blklen:1  blkcnt:1]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0003.
*** mmc1 got interrupt: 0x00000108
*** mmc1 got interrupt: 0x00000103
[ARG:0x9c2b0005]
[blklen:128  blkcnt:5]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0023.
*** mmc1 got interrupt: 0x00000009
*** mmc1 got interrupt: 0x00000002
[ARG:0x9c2d0003]
[blklen:128  blkcnt:3]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0023.
*** mmc1 got interrupt: 0x00000009
*** mmc1 got interrupt: 0x00000002
[ARG:0x9c2b0005]
[blklen:128  blkcnt:5]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0023.
*** mmc1 got interrupt: 0x00000009
*** mmc1 got interrupt: 0x00100002
athsdio mmc1:0001:1: Error -110 during CMD53 data phase.
Frame transmission failed
EndPoint: 1, Tx credits available: 5
ar6000_tx_complete() -TX ERROR
[ARG:0x9c2b0005]
[blklen:128  blkcnt:5]
sdhci_send_command 0x35 is starting...
mmc1: Too large timeout requested!
Configure the sg DMA, DMA_TO_DEVICE, len is 0x1
Complete sending cmd, transfer mode would be 0x353a0023.
*** mmc1 got interrupt: 0x00010001
athsdio mmc1:0001:1: Error -110 during CMD53 command phase.
Frame transmission failed
EndPoint: 1, Tx credits available: 5
ar6000_tx_complete() -TX ERROR