[Suzaku:00130] Re: NetBootできますか

Zhang, Xiaohui (SKZ) email@hidden
2004年 10月 27日 (水) 17:54:43 JST


Xiaohuiです。いつもお世話になっております。

教えていただいて、有難うございました。

教えていただいた通りにやってみましたが、
	VFS: Mounted root (nfs filesystem).
が表示した後、止まってしまいました(Loginにもいたらなかったです)
以下は起動時のログです。原因が分かれば、教えていただきたいです。

以上です。宜しくお願いいたします。

============================起動時ログ=================================
Copying kernel...done.
Linux version 2.4.26-uc0-suzaku0 (email@hidden) (gcc version 2.95.3-4 Xilinx EDK 6.1 Build EDK_G4On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
CPU: MICROBLAZE
Console: xmbserial on UARTLite
Kernel command line: console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.2:/home/suzaku/rootfs/suzaku
Calibrating delay loop... 25.39 BogoMIPS
Memory: 14972k/16384k available (992k code, 0k reserved, 47k data, 51k init)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Microblaze UARTlite serial driver version 1.00
ttyS0 at 0xffff2000 (irq = 1) is a Microblaze UARTlite
Starting kswapd
xgpio #0 at 0xFFFF5000 mapped to 0xFFFF5000
Xilinx GPIO registered
SMSC LAN91C111 Driver (v2.0), (Linux Kernel 2.4 + Support for Odd Byte) 09/24/01 -      by Pramod Bhar)eth0: SMC91C11xFD(rev:1) at 0xffe00300 IRQ:2 MEMSIZE:8192b NOWAIT:0 ADDR: 00:11:0c:00:10:ff
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Suzaku MTD mappings:
  Flash 0x400000 at 0xff000000
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 7 MTD partitions on "flash":
0x00000000-0x00400000 : "Flash/All"
0x00000000-0x00080000 : "Flash/FPGA"
0x00080000-0x000a0000 : "Flash/Bootloader"
0x003f0000-0x00400000 : "Flash/Config"
0x000a0000-0x003f0000 : "Flash/Image"
0x000a0000-0x00210000 : "Flash/Kernel"
0x00210000-0x003f0000 : "Flash/User"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
eth0:PHY remote fault detected
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 192.168.1.2, my address is 192.168.1.10
IP-Config: Complete:
      device=eth0, addr=192.168.1.10, mask=255.255.0.0, gw=255.255.255.255,
     host=192.168.1.10, domain=, nis-domain=(none),
     bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath=/home/suzaku/rootfs/suzaku
Looking up port of RPC 100003/2 on 192.168.1.2
Looking up port of RPC 100005/1 on 192.168.1.2
VFS: Mounted root (nfs filesystem).





suzaku メーリングリストの案内