[Suzaku:00220] Re: More on FLASH

[Shakith D. Fernando]

I tried using raw bit file without a header and write it to the fpga are.
It gave the following error msg.
DQ5 raised while program operation was in progress, however operation c

ompleted OK

but it didnt progrm the fpga correctly.


Is there any utility to remove the header part from the bit file?

Thanks
Best Regards
Shakith


----- Original Message ----- 
From: "Yasushi SHOJI" <email@hidden>
To: "SUZAKU general discussion list" <email@hidden>
Sent: Tuesday, January 11, 2005 8:19 AM
Subject: [Suzaku:00219] Re: More on FLASH


> Shakith,
>
> At Tue, 11 Jan 2005 02:10:09 +0800,
> Shakith D. Fernando wrote:
> >
> > I have some more questions.
> > What is the format of FPGA configuration information that can be written
to the /dev/flash/fpga area.
> > is it a bit file or mcs file or any other format?
>
> it's a bit file without header.  it seems like the header is from the
> offset 0x0 to 0x44, right before the 0xffffffff.
>
> best regards,
> --
>             yashi
> _______________________________________________
> suzaku mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/suzaku
>