[Suzaku:00230] Re: Trouble adding OPB slave

[Yasushi SHOJI]

At Fri, 14 Jan 2005 13:28:04 +0900,
yashi wrote:
> 
> > =====================================================
> > 
> > When I run the second program I get:
> > # /tmp/hello
> > debug trap
> > r0:00000000     r1:80FC7F24     r2:80FC1114     r3:FFFFB008
> > r4:80FC01A4     r5:00000001     r6:80FC7F80     r7:80FC7F88
> > r8:00000000     r9:00005401     r10:00000001    r11:00000020
> > r12:8003B588    r13:80FC1114    r14:80009FA0    r15:80FC017C
> > r16:00000009    r17:80FC04D0    r18:FFFFFF82    r19:00000001
> > r20:00000000    r21:00000000    r22:00000000    r23:8037FFAC
> > r24:00000000    r25:80374EBC    r26:8037FFBE    r27:8034F82C
> > r28:00000000    r29:8036EFE0    r30:8036B960    r31:00000FFF
> > pc:80FC04D0     psw:00000020
> > Trace/BPT trap
> > #
> 
> when you get debug trap, you'll see this out put.  but not sure why
> you get the debug trap.

Just got curious.  Microblaze 3.0 has bus error capability.  if you
are using that, you might get the error above.

I know you said you are using 2.0 but could you double check on it?

Thanks,
--
             yashi