[Suzaku:01101] コンフィグレーション
青山 義弘
email@hidden
2007年 12月 21日 (金) 13:32:57 JST
青山と申します。
初心者でありながら、大胆にSUZAKUに自作CRTCを作って乗せよ
うと考えています。ISEで基本信号作りまして、パターンとし
ては動作しているようです。ただし、DOTクロックにSYS_CLK(
てい倍前)使ったので、えらい間延びしています。
そこで、EDKでSYS_CLK(CPU_CLK)を2分周してDOTクロックを
作ることにして設計し、VHDLの読み込みやピン定義などしてBITSTREAM
までできました。
残りはコンフィグレーションですが、以下のようにメッセージ
出ます。
ここから先どの辺チェックすればよろしいでしょうか
At Local date and time: Fri Dec 21 12:34:17 2007
xbash -q -c "cd /cygdrive/c/suzaku/CRTC_1217_EDK/;
/usr/bin/make -f xps_proj.make download; exit;" started...
*********************************************
Downloading Bitstream onto the target board
*********************************************
impact -batch etc/download.cmd
Release 9.1.02i - iMPACT J.33
Copyright (c) 1995-2007 Xilinx, Inc. All rights reserved.
AutoDetecting cable. Please wait.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.0.0. WinDriver v8.10
Jungo (c) 1997 - 2006 Build Date: Aug 15 2006 X86 32bit
SYS
14:21:34, version = 810.
LPT base address = 0378h.
ECP base address = 0778h.
Cable connection established.
Identifying chain contents ....Version is 0000
'1': : Manufacturer's ID =Xilinx xc3s1200e, Version : 0
INFO:iMPACT:1777 -
Reading c:/Xilinx91i/spartan3e/data/xc3s1200e.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s1200e
successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Elapsed time = 0 sec.
Elapsed time = 0 sec.
'1': Loading file 'implementation/download.bit' ...
done.
WARNING:iMPACT:2257 - Startup Clock has been changed to
'JtagClk' in the
bitstream stored in memory,
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s1200e
successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Maximum TCK operating frequency for this device chain: 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Programming device...
done.
'1': Reading status register contents...
CRC error :
0
Decryptor security set :
0
DCM locked :
1
DCI matched :
1
legacy input error :
0
status of GTS_CFG_B :
0
status of GWE :
0
status of GHIGH :
0
value of MODE pin M0 :
1
value of MODE pin M1 :
0
value of MODE pin M2 :
0
value of CFG_RDY (INIT_B) :
0
DONEIN input from DONE pin :
0
IDCODE not validated while trying to write FDRI :
0
write FDRI issued before or after decrypt operation:
0
Decryptor keys not used in proper sequence :
0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0000 1000 0000 0000 0000 0000 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to
device.
INFO:iMPACT - '1': Checking done pin....done.
'1': Programming terminated. DONE did not go high.
Elapsed time = 18 sec.
Done!
--------------------------------------
New Design Yahoo! JAPAN 2008/01/01
http://pr.mail.yahoo.co.jp/newdesign/
suzaku メーリングリストの案内