[Suzaku:01729] Re: hermit panic

email@hidden
2010年 1月 7日 (木) 14:20:46 JST


溝渕様

お世話になります、niagaraです。

> また、serial1, serial2を定義した場合の挙動はどうなりますか?
ATDE minicomで通信ができるようになりました。
変更点は次のとおりです。
<atde2.vmx>------------------------------
serial0.fileName = "Auto detect" <- 変更
serial1.present = "TRUE"     <- 追加
serial1.fileName = "COM1"     <- 追加
<atde2.vmx>------------------------------

ATDEの端末で、
$ minicom -s
の後、シリアルデバイスを
/dev/ttyS1
としました。

以降ATDE上でソフトウェアマニュアルどおりimage.binを作成したあと、
端末で、
---------------------------------------------------------
$ hermit download -i image.bin -r image --port /dev/ttyS1
-NG CRC mismatch00 (98304) bytes of 2901034...
hermit: warning: from target: -NG CRC mismatch

-NG CRC mismatch
-NG CRC mismatch00 (106496) bytes of 2901034...
hermit: warning: from target: -NG CRC mismatch

-NG CRC mismatch
-NG CRC mismatch00 (131072) bytes of 2901034...
hermit: warning: from target: -NG CRC mismatch

-NG CRC mismatch
-NG CRC mismatch00 (188416) bytes of 2901034...
hermit: warning: from target: -NG CRC mismatch

-NG CRC mismatch
serial: 0x00038000 (229376) bytes of 2901034...
---------------------------------------------------------
、となったままになり書き込みに失敗しました。

また、image.binを付属CDのimage-sz130-sil.binにしたところ、
---------------------------------------------------------
-NG CRC mismatch00 (860160) bytes of 2901034...
hermit: warning: form target: -NG CRC mismatch

-NG CRC mismatch00 (1998478) bytes of 2901034...
hermit: warning: form target: -NG CRC mismatch

-NG CRC mismatch00 (2211840) bytes of 2901034...
hermit: warning: form target: -NG CRC mismatch

-NG CRC mismatch
hermit: target.c:510: target_add_progress: Assertion 'tc->progress <=
tc->goal' failed.
アボートしました。
$
---------------------------------------------------------
、となりこれも書き込みに失敗しているようです。

FPGAの書き換え
(SPI Writerで fpga-sz130-sil-101i-20090319.bit)
ブートローダHermitの書き換え
(TeraTermで loader-suzaku-loader-suzaku-microblaze.v1.1.21-8M.srec)
を行った後も、同様な状況です。

引き続きアドバイスいただければ幸いです。




suzaku メーリングリストの案内