[Armadillo:00326] Re: atmark-dist-20050506のrootログイン問題

nakai email@hidden
2005年 6月 4日 (土) 17:33:15 JST


中井です。

起動ログから判断すると、 /lib/ld-2.3.2.so が無いといわれてます。
お手数ですが、次のことを確認してもらえますか?

・開発PC(coLinux)にて、/usr/arm-linux/lib/ld-2.3.2.so があるでしょうか?
・上記があるようでしたら、PC上で dpkg -l sed とコマンドを実行して
  sed のバージョンを確認してみてください。
  もし、4.1.2-8 よりも古いようでしたら、sedをupgradeしてみてください。


----- Original Message ----- 
From: email@hidden 
To: email@hidden 
Sent: Thursday, June 02, 2005 6:48 PM
Subject: [Armadillo:00323] atmark-dist-20050506のrootログイン問題


ホウ@日本電素です。

atmark-dist-20050506とlinux-2.4.27-a9-5
で以下のConfigでビルドして、Armadillo-9に
焼きました。
--------------------- config --------------------------
Vendor AtmarkTechno AtmarkTechno
Products Armadillo-9 Libc Version None 
Default all settings y 
Customize Kernel Settings n 
Customize Vendor/User Settings n 
Update Default Vendor Settings n
-----------------------------------------------------
が、リセットすると、以下の起動メッセージが出たあと、
root(passwd:root)、guest(passwd:なし)
でログインできません。

---------------- armadillo-9の起動メッセージ ---------------

Hermit v1.3-armadillo9-3 compiled at 16:20:09, Apr 21 2005
Uncompressing  kernel................................................................done.
Uncompressing ramdisk...........................................................................................................
....................................................................................................done.
Doing console=ttyAM0,115200
Doing mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(userland),-(config)
Linux version 2.4.27-a9-5 (email@hidden) (gcc version 3.4.1 (Debian 3.4.1-4sarge1)) #1 Thu Jun 2 09:11:16 UTC 2005
CPU: Arm920Tid(wb) revision 0
Machine: Armadillo-9
alloc_bootmem_low
memtable_init
On node 0 totalpages: 16384
zone(0): 24576 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(userland),-(c
onfig)
Console: colour dummy device 80x30
Calibrating delay loop... 99.73 BogoMIPS
Memory: 32MB 32MB = 64MB total
Memory: 55924KB available (1840K code, 355K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
i2c-armadillo9: i2c Armadillo9 driver, (C) 2004-2005 Atmark Techno, Inc.
i2c-s3531a: Device Type [S-3531A]
i2c-s3531a: i2c S-3531A driver, (C) 2001-2005 Atmark Techno, Inc.
i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2004 Atmark Techno, Inc.
Console: switching to colour frame buffer device 80x60
ttyAM0 at MMIO 0xff8c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0xff8d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0xff8e0000 (irq = 55) is a AMBA
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
No card in slot: PFDR=000000ff
SCSI subsystem driver Revision: 1.00
ARMADILLO9-NOR:0x00800000 at 0x60000000
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
ARMADILLO9-NOR:using command line partition definition
Creating 4 MTD partitions on "NOR flash on ARMADILLO9":
0x00000000-0x00010000 : "bootloader"
0x00010000-0x00180000 : "kernel"
0x00180000-0x007f0000 : "userland"
0x007f0000-0x00800000 : "config"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0xff020000, IRQ 56
host/usb-ohci.c: usb-, ep93xx
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: ff020000
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <email@hidden>
hid-core.c: USB HID support drivers
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 6592 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 6592K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 68K
init started:  BusyBox v1.00 (2005.06.02-09:15+0000) multi-call binary
Starting fsck for root filesystem.
fsck 1.25 (20-Sep-2001)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram0 is mounted.
/dev/ram0: clean, 603/1024 files, 4044/6592 blocks
Checking root filesystem:                                       done
Remounting root rw:                                             done
Mounting proc:                                                  done
Setting hostname:                                               done
Cleaning up system:                                             done
Running local start scripts.
Changing file permissions: ln: /lib/ld-2.3.2.so: No such file or directory
                                                                done
Starting syslogd:                                               done
Starting klogd:                                                 done
Starting basic firewall: iptables v1.2.11: invalid TCP port/service `http' specified
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.11: invalid TCP port/service `telnet' specified
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.11: invalid TCP port/service `ftp' specified
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.11: invalid TCP port/service `ftp-data' specified
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.11: invalid TCP port/service `auth' specified
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.11: invalid UDP port/service `ntp' specified
Try `iptables -h' or 'iptables --help' for more information.
                                                                done
Configuring network interfaces:                                 done
Starting thttpd: thttpd: unknown user - 'nobody'
                                                                done
Starting inetd:                                                 done

atmark-dist v1.1.0 (AtmarkTechno/Armadillo-9)
Linux 2.4.27-a9-5 [armv4l arch]

armadillo9 login: root
Password:
Login incorrect
armadillo9 login: guest
Password:
Login incorrect
-----------------------------------------------------------------------------------
 /lib/ld-2.3.2.soの問題かも知れませんが、これはAtmark-distでは解決されたはず?
ちなみに同じ開発環境でuClinux-distでは問題ありませんでした。distのビルドは
rootユーザーではなく、通常ユーザーで行いました(WindowsXP、Colinux0.6.1)。

ご教授のほど宜しくお願い致します。








_______________________________________________
armadillo mailing list
email@hidden
http://lists.atmark-techno.com/mailman/listinfo/armadillo



armadillo メーリングリストの案内