[Armadillo:00343] Re: atmark-dist-20050506のrootログイン
渡辺 明圭
email@hidden
2005年 6月 7日 (火) 11:43:12 JST
お世話になります。
渡辺＠ＮＳＥＣです。
fileコマンドはapt-cache show fileにて
3.37-3.1.woody.1でした。
apt-get -f install file としても
Sorry, file is already the newest version.
と出て、更新されないため、4.12-1のパッケージをダウンロードしてきて
dpkgにてインストールしました。
（file単独では入らなったため、他２コマンドも同時にインストールしました。）
Setting up zlib1g(1.2.2-4)...
Setting up libmagic1(4.12-1)...
Setting up file(4.12-1)...
と、しましたが、
状況、立ち上げ時のログに変化はありません。
他、何かバージョンが古かったり
fileコマンドのインストール方法がいけないのでしょうか？
なにか調査方法などありましたらあわせてご教授願います。
よろしくおねがいいたします。
-----Original Message-----
From: email@hidden
[mailto:email@hidden]On Behalf Of nakai
Sent: Monday, June 06, 2005 7:19 PM
To: Armadillo series general discussion list
Subject: [Armadillo:00331] Re: atmark-dist-20050506のrootログイン
中井です。
fileコマンドのversionはどうなっているでしょうか？
私のcolinuxでは 4.12-1 となっています。
----- Original Message -----
From: "渡辺 明圭"
To: <email@hidden>
Sent: Monday, June 06, 2005 6:57 PM
Subject: [Armadillo:00330] Re: atmark-dist-20050506のrootログイン
> お世話になっております。
> 渡辺＠ＮＳＥＣと申します。
>
> この件について解決されたのでしょうか？
>
> 便乗で申し訳ありませんが
> わたしも同様に作成したイメージでは、rootや、guestでログインができません。
> 開発PCに/usr/arm-linux/lib/ld-2.3.2.soはあります。
> -rwxr-xr-x 1 root root 84568 May 30 2004 ld-2.3.2.so
>
> sedのバージョンは
> ii sed 4.1.2-8 The GNU sed stream editor
>
> となっています。
> 他、対策やバージョンなど調査項目がありましたら、お願いいたします。
> よろしくおねがいします。
>
> 一応、起動時のログです。
> ↓↓↓ここから
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Journalled Block Device driver loaded
> i2c-core.o: i2c core module version 2.6.1 (20010830)
> i2c-algo-bit.o: i2c bit algorithm module
> i2c-armadillo9: i2c Armadillo9 driver, (C) 2004 Atmark Techno, Inc.
> i2c-s3531a: i2c S-3531A driver, (C) 2001-2004 Atmark Techno, Inc.
> i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2004 Atmark Techno, Inc.
> Console: switching to colour frame buffer device 80x60
> ttyAM0 at MMIO 0xff8c0000 (irq = 52) is a AMBA
> ttyAM1 at MMIO 0xff8d0000 (irq = 54) is a AMBA
> ttyAM2 at MMIO 0xff8e0000 (irq = 55) is a AMBA
> ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
> RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
> No card in slot: PFDR=000000ff
> SCSI subsystem driver Revision: 1.00
> ARMADILLO9-NOR:0x00800000 at 0x60000000
> Amd/Fujitsu Extended Query Table v1.3 at 0x0040
> number of CFI chips: 1
> cfi_cmdset_0002: Disabling fast programming due to code brokenness.
> ARMADILLO9-NOR:using command line partition definition
> Creating 4 MTD partitions on "NOR flash on ARMADILLO9":
> 0x00000000-0x00010000 : "bootloader"
> 0x00010000-0x00180000 : "kernel"
> 0x00180000-0x007f0000 : "userland"
> 0x007f0000-0x00800000 : "config"
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> host/usb-ohci.c: USB OHCI at membase 0xff020000, IRQ 56
> host/usb-ohci.c: usb-, ep93xx
> usb.c: new USB bus registered, assigned bus number 1
> Product: USB OHCI Root Hub
> SerialNumber: ff020000
> hub.c: USB hub found
> hub.c: 3 ports detected
> usb.c: registered new driver hid
> hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <email@hidden>
> hid-core.c: USB HID support drivers
> usb.c: registered new driver audio
> audio.c: v1.0.0:USB Audio Class driver
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> mice: PS/2 mouse device common for all mice
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> ip_tables: (C) 2000-2002 Netfilter core team
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> NetWinder Floating Point Emulator V0.97 (double precision)
> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 6592 blocks [1 disk] into ram disk... done.
> Freeing initrd memory: 6592K
> VFS: Mounted root (ext2 filesystem).
> Freeing init memory: 68K
> init started: BusyBox v1.00 (2005.06.06-08:16+0000) multi-call binary
> Starting fsck for root filesystem.
> fsck 1.25 (20-Sep-2001)
> ext2fs_check_if_mount: No such file or directory while determining whether
> /dev/
> ram0 is mounted.
> /dev/ram0: clean, 603/1024 files, 4044/6592 blocks
> Checking root filesystem: done
> Remounting root rw: done
> Mounting proc: done
> Setting hostname: done
> Cleaning up system: done
> Running local start scripts.
> Changing file permissions: ln: /lib/ld-2.3.2.so: No such file or directory
> done
> Starting syslogd: done
> Starting klogd: done
> Starting basic firewall: iptables v1.2.11: invalid TCP port/service `http'
> speci
> fied
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `telnet' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `ftp' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `ftp-data' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `auth' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid UDP port/service `ntp' specified
> Try `iptables -h' or 'iptables --help' for more information.
> done
> Configuring network interfaces: done
> Starting thttpd: thttpd: unknown user - 'nobody'
> done
> Starting inetd: done
>
> atmark-dist v1.1.0 (AtmarkTechno/Armadillo-9)
> Linux 2.4.27-a9-3 [armv4l arch]
> ↑↑↑ここまで
>
>
> -----Original Message-----
> From: email@hidden
> [mailto:email@hidden]On Behalf Of nakai
> Sent: Saturday, June 04, 2005 5:33 PM
> To: Armadillo series general discussion list
> Subject: [Armadillo:00326] Re: atmark-dist-20050506のrootログイン問題
>
>
> 中井です。
>
> 起動ログから判断すると、 /lib/ld-2.3.2.so が無いといわれてます。
> お手数ですが、次のことを確認してもらえますか？
>
> ・開発PC（coLinux）にて、/usr/arm-linux/lib/ld-2.3.2.so があるでしょうか？
> ・上記があるようでしたら、PC上で dpkg -l sed とコマンドを実行して
> sed のバージョンを確認してみてください。
> もし、4.1.2-8 よりも古いようでしたら、sedをupgradeしてみてください。
>
>
> ----- Original Message -----
> From: email@hidden
> To: email@hidden
> Sent: Thursday, June 02, 2005 6:48 PM
> Subject: [Armadillo:00323] atmark-dist-20050506のrootログイン問題
>
>
> ホウ@日本電素です。
>
> atmark-dist-20050506とlinux-2.4.27-a9-5
> で以下のConfigでビルドして、Armadillo-9に
> 焼きました。
> --------------------- config --------------------------
> Vendor AtmarkTechno AtmarkTechno
> Products Armadillo-9 Libc Version None
> Default all settings y
> Customize Kernel Settings n
> Customize Vendor/User Settings n
> Update Default Vendor Settings n
> -----------------------------------------------------
> が、リセットすると、以下の起動メッセージが出たあと、
> root(passwd:root)、guest（passwd:なし）
> でログインできません。
>
> ---------------- armadillo-9の起動メッセージ ---------------
>
> Hermit v1.3-armadillo9-3 compiled at 16:20:09, Apr 21 2005
> Uncompressing
>
kernel................................................................done.
> Uncompressing
>
ramdisk.....................................................................
> ......................................
>
............................................................................
> ........................done.
> Doing console=ttyAM0,115200
> Doing
>
mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(user
> land),-(config)
> Linux version 2.4.27-a9-5 (email@hidden) (gcc version 3.4.1 (Debian
> 3.4.1-4sarge1)) #1 Thu Jun 2 09:11:16 UTC 2005
> CPU: Arm920Tid(wb) revision 0
> Machine: Armadillo-9
> alloc_bootmem_low
> memtable_init
> On node 0 totalpages: 16384
> zone(0): 24576 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line: console=ttyAM0,115200
>
mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(user
> land),-(c
> onfig)
> Console: colour dummy device 80x30
> Calibrating delay loop... 99.73 BogoMIPS
> Memory: 32MB 32MB = 64MB total
> Memory: 55924KB available (1840K code, 355K data, 68K init)
> Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
> Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Journalled Block Device driver loaded
> i2c-core.o: i2c core module version 2.6.1 (20010830)
> i2c-algo-bit.o: i2c bit algorithm module
> i2c-armadillo9: i2c Armadillo9 driver, (C) 2004-2005 Atmark Techno, Inc.
> i2c-s3531a: Device Type [S-3531A]
> i2c-s3531a: i2c S-3531A driver, (C) 2001-2005 Atmark Techno, Inc.
> i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2004 Atmark Techno, Inc.
> Console: switching to colour frame buffer device 80x60
> ttyAM0 at MMIO 0xff8c0000 (irq = 52) is a AMBA
> ttyAM1 at MMIO 0xff8d0000 (irq = 54) is a AMBA
> ttyAM2 at MMIO 0xff8e0000 (irq = 55) is a AMBA
> ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
> RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
> No card in slot: PFDR=000000ff
> SCSI subsystem driver Revision: 1.00
> ARMADILLO9-NOR:0x00800000 at 0x60000000
> Amd/Fujitsu Extended Query Table v1.3 at 0x0040
> number of CFI chips: 1
> cfi_cmdset_0002: Disabling fast programming due to code brokenness.
> ARMADILLO9-NOR:using command line partition definition
> Creating 4 MTD partitions on "NOR flash on ARMADILLO9":
> 0x00000000-0x00010000 : "bootloader"
> 0x00010000-0x00180000 : "kernel"
> 0x00180000-0x007f0000 : "userland"
> 0x007f0000-0x00800000 : "config"
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> host/usb-ohci.c: USB OHCI at membase 0xff020000, IRQ 56
> host/usb-ohci.c: usb-, ep93xx
> usb.c: new USB bus registered, assigned bus number 1
> Product: USB OHCI Root Hub
> SerialNumber: ff020000
> hub.c: USB hub found
> hub.c: 3 ports detected
> usb.c: registered new driver hid
> hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <email@hidden>
> hid-core.c: USB HID support drivers
> usb.c: registered new driver audio
> audio.c: v1.0.0:USB Audio Class driver
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> mice: PS/2 mouse device common for all mice
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> ip_tables: (C) 2000-2002 Netfilter core team
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> NetWinder Floating Point Emulator V0.97 (double precision)
> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 6592 blocks [1 disk] into ram disk... done.
> Freeing initrd memory: 6592K
> VFS: Mounted root (ext2 filesystem).
> Freeing init memory: 68K
> init started: BusyBox v1.00 (2005.06.02-09:15+0000) multi-call binary
> Starting fsck for root filesystem.
> fsck 1.25 (20-Sep-2001)
> ext2fs_check_if_mount: No such file or directory while determining whether
> /dev/ram0 is mounted.
> /dev/ram0: clean, 603/1024 files, 4044/6592 blocks
> Checking root filesystem: done
> Remounting root rw: done
> Mounting proc: done
> Setting hostname: done
> Cleaning up system: done
> Running local start scripts.
> Changing file permissions: ln: /lib/ld-2.3.2.so: No such file or directory
> done
> Starting syslogd: done
> Starting klogd: done
> Starting basic firewall: iptables v1.2.11: invalid TCP port/service `http'
> specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `telnet' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `ftp' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `ftp-data' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid TCP port/service `auth' specified
> Try `iptables -h' or 'iptables --help' for more information.
> iptables v1.2.11: invalid UDP port/service `ntp' specified
> Try `iptables -h' or 'iptables --help' for more information.
> done
> Configuring network interfaces: done
> Starting thttpd: thttpd: unknown user - 'nobody'
> done
> Starting inetd: done
>
> atmark-dist v1.1.0 (AtmarkTechno/Armadillo-9)
> Linux 2.4.27-a9-5 [armv4l arch]
>
> armadillo9 login: root
> Password:
> Login incorrect
> armadillo9 login: guest
> Password:
> Login incorrect
>
----------------------------------------------------------------------------
> -------
> /lib/ld-2.3.2.soの問題かも知れませんが、これはAtmark-distでは解決されたは
> ず？
> ちなみに同じ開発環境でuClinux-distでは問題ありませんでした。distのビルドは
> rootユーザーではなく、通常ユーザーで行いました（WindowsXP、
Colinux0.6.1）。
>
> ご教授のほど宜しくお願い致します。
>
>
>
>
>
>
>
>
> _______________________________________________
> armadillo mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/armadillo
> _______________________________________________
> armadillo mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/armadillo
> _______________________________________________
> armadillo mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/armadillo
_______________________________________________
armadillo mailing list
email@hidden
http://lists.atmark-techno.com/mailman/listinfo/armadillo
armadillo メーリングリストの案内