[Armadillo:01494] Re: about armadillo-210

[Yasushi SHOJI]

Hi,

# please keep CC when you send email.

let's start with non-XIP, because that is the default
configuration for a210.

when you compiled a210 image, did you change any
configuration?  if not, you might wanna check your
envrionment first.

have you tried ATDE?
http://download.atmark-techno.com/atde/
-- 
          yashi


On 2/26/07, email@hidden <email@hidden> wrote:
> hello:
>
> Compile is ok.
>
> When boot, if I choose XIP kernel (0xC001,8000  is it right ?),
>
> Uncompressing
> kernel............................................................................done.
> Uncompressing
> ramdisk.........................................................................................................Doing console=ttyAM0,115200
> Doing
> mtdparts=armadillo210-nor:0x10000(bootloader)ro,0x170000(kernel),0x270000(userland),-(config)
>
> nothing output from kernel.
>
> When I choose non-XIP mode ,
> after
> Uncompressing
> Linux................................................................................... done, booting the kernel.
>
> stopped.
>
> Now, what should I do ? May you help me ?