[Armadillo:02070] Re: System bootup in progressでログイン出来ず

[Hiroki Nakamura]

To:溝渕様
中村です。
お世話になります。

ご回答有難うございました。

> 何度もすみませんが、上記設定後に再度起動ログを貼り付けていただけないで
> しょうか？

ご指摘頂きました手順に従い、ログを採取致しました。
（かなり長めです。。）

↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓

Hermit-At v1.1.6 (armadillo9/et
h) compiled at 16:03:21, Nov 30 2006
Disk drive detected: 1024MB CompactFlash Card CF_A408J A141121038O004009833
/dev/hdc1: start=0x0000003f, size=0x00018981
Image.gz is found.
Copying        kernel......done.
Uncompressing
kernel.....................................................................
......................done.
Doing console=ttyAM0,115200
Doing root=/dev/hdc2
Doing noinitrd
Doing
mtdparts=armadillo9-nor:0x10000(bootloader)ro,0x170000(kernel),0x670000(user
land),-(
config)
Linux version 2.6.12.3-a9-8 (email@hidden) (gcc version 3.4.4 20050314
(prerelease) (Debian
 3.4.3-13)) #1 Fri Oct 20 13:55:08 JST 2006
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Machine: Armadillo-9
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyAM0,115200 root=/dev/hdc2 noinitrd
mtdparts=armadillo9-nor
:0x10000(bootloader)ro,0x170000(kernel),0x670000(userland),-(config)
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 32MB 32MB = 64MB total
Memory: 61680KB available (2374K code, 574K data, 104K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (email@hidden)
devfs: boot_options: 0x0
Console: switching to colour frame buffer device 80x30
fb0: EP93xx frame buffer at 640x480x16
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a EP93XX
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a EP93XX
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a EP93XX
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
i2c /dev entries driver
i2c-armadillo9: i2c Armadillo-9 driver, (C) 2004-2005 Atmark Techno, Inc.
i2c-at24cxx: i2c at24cxx eeprom driver, (C) 2003-2005 Atmark Techno, Inc.
i2c-s3531a: Device Type [S-353x0A]
i2c-s3531a: i2c S-3531A/S-353X0A driver, (C) 2001-2005 Atmark Techno, Inc.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
 Fixed Disk Card
 IDE interface
 [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Trying to free nonexistent resource <c6800000-c680000f>
hdc: 1024MB CompactFlash Card, ATA DISK drive
ide1 at 0xc6800000-0xc6800007,0xc680000e on irq 49
hdc: max request size: 128KiB
hdc: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63
hdc: cache flushes not supported
 /dev/ide/host1/bus0/target0/lun0: p1 p2
armadillo9-nor: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
armadillo9-nor: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
4 cmdlinepart partitions found on MTD device armadillo9-nor
parse_mtd_partitions:4
Creating 4 MTD partitions on "armadillo9-nor":
0x00000000-0x00010000 : "bootloader"
0x00010000-0x00180000 : "kernel"
0x00180000-0x007f0000 : "userland"
0x007f0000-0x00800000 : "config"
ep93xxusb ep93xxusb.0: EP93xx OHCI
ep93xxusb ep93xxusb.0: new USB bus registered, assigned bus number 1
ep93xxusb ep93xxusb.0: irq 56, io base 0xff020000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdc2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 104K
INIT: version 2.86 booting
Activating swap.
Checking root file system...
fsck 1.35 (28-Feb-2004)
/dev/hdc2: clean, 32939/112672 files, 213866/225036 blocks
EXT3 FS on hdc2, internal journal
System time was Fri Sep 21 12:10:29 UTC 2007.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Fri Sep 21 12:10:31 UTC 2007.
Cleaning up ifupdown...done.
Not running depmod because /lib/modules/2.6.12.3-a9-8/ is not writeable.
Loading modules...
    ide-cd
FATAL: Could not load /lib/modules/2.6.12.3-a9-8/modules.dep: No such file
or directory
    ide-detect
FATAL: Could not load /lib/modules/2.6.12.3-a9-8/modules.dep: No such file
or directory
All modules loaded.
FATAL: Could not load /lib/modules/2.6.12.3-a9-8/modules.dep: No such file
or directory
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/dev/hdc1: clean, 13/12600 files, 2914/50368 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
/dev/hdc1 on /boot type ext2 (ro,errors=remount-ro)
Cleaning /tmp /var/run /var/lock.
Detecting hardware:
Running 0dns-down to make sure resolv.conf is ok...done.
Initializing: /etc/network/ifstate.
Starting hotplug subsystem:
   pci
   pci      [success]
   usb
   usb      [success]
   isapnp
   isapnp   [success]
   ide
   ide      [success]
   net
   net      [success]
   input
   input    [success]
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...eth0: Link is down!
done.
Starting portmap daemon: portmap.

Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Fri Sep 21 21:10:40 JST 2007

Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
Setting up ICE socket directory /tmp/.ICE-unix...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting portmap daemon: portmap.
Starting cannaserver...

ERROR:
   Another 'cannaserver' is detected.
   If 'cannaserver' is not running,
   "/tmp/.iroha_unix/IROHA" may remain accidentally.
   So, after making sure that 'cannaserver' is not running.
   Please execute following command.

               rm /tmp/.iroha_unix/IROHA

Starting MTA: exim4.
Starting internet superserver: inetd.
Starting printer spooler: lpd .
Starting MySQL database server: mysqld

↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑

以上、
よろしくお願いします。