[Armadillo:02962] Re: Armadillo-500 イメージファイルをターゲットボードに転送できません。

2008年 6月 6日 (金) 15:07:51 JST

木原です。
お世話になっています。

以下は、カーネルパニックを起こしたときの
画面に出力された内容です。

email@hidden:~/atmark-dist-20071018/images$ minicom

minicom \u3078\u3088\u3046\u3053\u305d 2.2

\u30aa\u30d7\u30b7\u30e7\u30f3: I18n
\u30b3\u30f3\u30d1\u30a4\u30eb\u3055\u308c\u305f\u65e5\u6642\u306f:  Jan  7 
2007, 18:00:43.
Port /dev/ttyS0

               CTRL-A Z 
\u3092\u62bc\u3059\u3068\u3001\u8aac\u660e\u753b\u9762\u306b\u306a\u308a\u307e\u3059\u3002

armadillo5x0_pcmcia: PCMCIA driver [Rev.1 (2007/--/--)], (C) 2007 Atmark 
Techno.usbmon: debugfs is not available
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 36, io base 0x43f88400
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 37, io base 0x43f88000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
mice: PS/2 mouse device common for all mice
tactsw: Armadillo-5x0 Tact-SW driver [Rev.1.00]
input: Tact-SW Port1 as /class/input/input0
input: Tact-SW Port2 as /class/input/input1
rtc-s353xxa: S-353XXA Real Time Clock class driver [Rev.1 (2007/--/--)], (C) 
20.i2c /dev entries driver
i2c_armadillo5x0: Armadillo-5x0 I2C driver [Rev.1 (2007/--/--)], (C) 2007 
Atmar.rtc-s353xxa 0-0030: rtc intf: sysfs
rtc-s353xxa 0-0030: rtc intf: proc
rtc-s353xxa 0-0030: rtc intf: dev (253:0)
rtc-s353xxa 0-0030: rtc core: registered S-353XXA as rtc0
tlv320aic: TI TLV320AIC Audio codec driver [Rev.1 (2007/--/--)], (C) 2007 
Atmar.IPU Post-filter loading
SSI module loaded successfully
led: Armadillo-5x0 LED driver, (C) 2007 Atmark Techno, Inc.
Registered led device: led1
Registered led device: led2
Registered led device: led3
Registered led device: led4
Registered led device: led5
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 
13:55:50.mxc_alsa_i2s: MXC ALSA iis audio driver [Rev.1 (2007/--/--)], (C) 
2007 Atmark T.usbcore: registered new driver snd-usb-audio
ALSA device list:
  #0: mxc i2s audio
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation 
<email@hidden>
Power Management for Freescale MX31
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
rtc-s353xxa 0-0030: setting the system clock to 2000-01-04 00:58:09 
(946947489)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
No filesystem could mount root, tried:  ext3 ext2 msdos vfat
Kernel panic - not syncing: VFS: Unable to mount root fs on 
unknown-block(1,0)
 Hermit-At v1.1.12 (Armadillo-500) compiled at 21:41:11, Oct 18 2007
Uncompressing 
kernel..........................................................7Uncompressing 
kernel...........................................................Uncompressing 
ramdisk...........................................................Linux 
version 2.6.18-at2 (email@hidden) (gcc version 4.1.2 20061115 
(prerelease)8CPU: Some Random V6 Processor [4107b364] revision 4 (ARMv6TEJ), 
cr=00c5387f
Machine: Armadillo-500
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists.  Total pages: 16384
Kernel command line: console=ttymxc0
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 2048 bytes)
Actual CLOCK_TICK_RATE is 60000000 Hz
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 57160KB available (3074K code, 719K data, 120K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (bad gzip magic numbers); looks 
like dFreeing initrd memory: 3784K
NET: Registered protocol family 16
MXC GPIO hardware
system_rev is: 0x11
Clock input source is 26000000
L2 cache: WB
Using SDMA I.API
MXC DMA API initialized
usb: Host 2 registered
usb: OTG HS Host registered
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
MXC MMC/SD driver
mxcmci-0 found
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
Low-Level PM Driver module loaded
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x30
fb0: MXC frame buffer at 640x480x16 (CRT-VGA)
gpio: Armadillo-5x0 GPIO Sample driver [Rev.1.00]
MXC WatchDog Driver 2.0
MXC Watchdog Timer: initial timeout 60 sec
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC
mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
smsc911x: Driver version 2007-07-13.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
armadillo5x0-nor: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
armadillo5x0-nor: use default partitions(4)
Creating 4 MTD partitions on "armadillo5x0-nor":
0x00000000-0x00020000 : "nor.bootloader"
0x00020000-0x00220000 : "nor.kernel"
0x00220000-0x00fe0000 : "nor.userland"
0x00fe0000-0x01000000 : "nor.config"
MXC MTD nand Driver 2.0
NAND device: Manufacturer ID: 0x20, Chip ID: 0xda (ST Micro NAND 256MiB 3,3V 
8-)Scanning device for bad blocks
Bad eraseblock 237 at 0x01da0000
Bad eraseblock 238 at 0x01dc0000
Creating 4 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00020000 : "nand.ipl"
0x00020000-0x00420000 : "nand.kernel"
0x00420000-0x01a20000 : "nand.userland"
0x01a20000-0x10000000 : "nand.free"
armadillo5x0_pcmcia: PCMCIA driver [Rev.1 (2007/--/--)], (C) 2007 Atmark 
Techno.usbmon: debugfs is not available
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 36, io base 0x43f88400
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 37, io base 0x43f88000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
mice: PS/2 mouse device common for all mice
tactsw: Armadillo-5x0 Tact-SW driver [Rev.1.00]
input: Tact-SW Port1 as /class/input/input0
input: Tact-SW Port2 as /class/input/input1
rtc-s353xxa: S-353XXA Real Time Clock class driver [Rev.1 (2007/--/--)], (C) 
20.i2c /dev entries driver
i2c_armadillo5x0: Armadillo-5x0 I2C driver [Rev.1 (2007/--/--)], (C) 2007 
Atmar.rtc-s353xxa 0-0030: rtc intf: sysfs
rtc-s353xxa 0-0030: rtc intf: proc
rtc-s353xxa 0-0030: rtc intf: dev (253:0)
rtc-s353xxa 0-0030: rtc core: registered S-353XXA as rtc0
tlv320aic: TI TLV320AIC Audio codec driver [Rev.1 (2007/--/--)], (C) 2007 
Atmar.IPU Post-filter loading
SSI module loaded successfully
led: Armadillo-5x0 LED driver, (C) 2007 Atmark Techno, Inc.
Registered led device: led1
Registered led device: led2
Registered led device: led3
Registered led device: led4
Registered led device: led5
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 
13:55:50.mxc_alsa_i2s: MXC ALSA iis audio driver [Rev.1 (2007/--/--)], (C) 
2007 Atmark T.usbcore: registered new driver snd-usb-audio
ALSA device list:
  #0: mxc i2s audio
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation 
<email@hidden>
Power Management for Freescale MX31
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
rtc-s353xxa 0-0030: setting the system clock to 2000-01-04 01:01:22 
(946947682)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
No filesystem could mount root, tried:  ext3 ext2 msdos vfat
Kernel panic - not syncing: VFS: Unable to mount root fs on 
unknown-block(1,0)

----------------------------------------------------------------------

以上、宜しくお願い申し上げます。

----- Original Message ----- 
From: "Yasushi SHOJI" <email@hidden>
To: "Armadillo series general discussion list" 
<email@hidden>
Sent: Friday, June 06, 2008 2:01 PM
Subject: [Armadillo:02960] Re: Armadillo-500 イメージファイルをターゲットボードに転送できません。

> At Fri, 06 Jun 2008 14:00:16 +0900,
> Yasushi SHOJI wrote:
>>
>> At Fri, 06 Jun 2008 14:01:35 +0900,
>> g-kihara wrote:
>> >
>> >          を行ったところ、hermit: panic: can't connect to target
>> >          となりました。
>> >
>> >          シリアルポートは、 /dev/ttyS0であり、ボードとシリアル通信ができているのは
>> > 　　　　確認しています。
>>
>> minicomが、ttyS0を掴んでたりします？
>
> もし、minicomを使っているなら
>
> http://armadillo.atmark-techno.com/howto/minicom_hermit
>
> とか、便利かもしれません。
> -- 
>            yashi
> _______________________________________________
> armadillo mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/armadillo 