[Suzaku-en:00041] Re: Error when following example in hardware manual

Keichi Kawaoka email@hidden
Tue Jul 12 14:27:51 JST 2005


Hi.Zijia

I do not think that the parallel cable is correct either.
Because errors are occuring on both the JTAG CON2 and CON7 ports.
Is the parallel cable that you are using made by Xilinx?
You should look for a correct parallel cable.

Best regards
Kawaoka


----- Original Message ----- 
From: "Ye Zijia" <email@hidden>
To: <email@hidden>
Sent: Friday, July 08, 2005 12:47 PM
Subject: [Suzaku-en:00040] Error when following example in hardware manual


> Hi, i am new to suzaku and encountered this error while following the example in the hardware manual. Can someone help and tell 
> me what to do ?
>
>
> when connecting suzaku using JTAG to con 2,
>
> C:\zijia\suzaku-20050115>lbplay2 -deb top.mcs
> LittleBearPlayer2  0.17
> mcs file1 = top.mcs
> ***    WinNT mode    ***
> ERROR:  Device not found.
>
>
>
> when i tried connecting the JTAG to con 7 and use impact to do a boundary scan, i found an unknown device instead. Shouldn't i 
> detect a Spartan 3 xc3s400 instead ?
>
> This is the log :
>
> AutoDetecting cable. Please wait.
>
> CB_PROGRESS_START - Starting Operation.
>
> Connecting to cable (USB Port).
>
> Cable connection failed.
>
> Connecting to cable (Parallel Port - LPT1).
>
> Checking cable driver.
>
> Driver windrvr6.sys version = 6.2.2.2.
>
> LPT base address = 0378h.
>
> ECP base address = 0778h.
>
> Cable connection established.
>
> CB_PROGRESS_END - End Operation.
>
> Elapsed time = 1 sec.
>
> // *** BATCH CMD : Identify
>
> PROGRESS_START - Starting Operation.
>
> Identifying chain contents ....
>
> INFO:iMPACT:1588 - '1':The part does not appear to be Xilinx Part.
>
> '1': : Manufacturer's ID =Unknown , Version : 15
>
> INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
>
> ----------------------------------------------------------------------
>
> ----------------------------------------------------------------------
>
> done.
>
> PROGRESS_END - End Operation.
>
> Elapsed time = 2 sec.
>
> Device #1 selected
>
>
>
> Thanks and regards,
>
> Zijia
>
>
> _______________________________________________
> suzaku-en mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/suzaku-en
>
> 




More information about the suzaku-en mailing list