[Suzaku-en:00506] Re: ERROR:MDT - xget_value 37816216 iplist : An invalid handle type was provided

mio email@hidden
Wed Nov 28 14:05:29 JST 2007


Hi.

> Hi all,
>  
> i download Suzaku-S designe for SZ030 from suzaku website.:
> http://suzaku-en.atmark-techno.com/downloads/all/&dir=/fpga_proj/9.1i/sz030 
> <http://suzaku-en.atmark-techno.com/downloads/all/&dir=/fpga_proj/9.1i/sz030> ----->sz030-20071019.zip
>  
> i generate the Bitstream and it works without problem
> i m using EDK9.2i and the Design Project is made with EDK9.1i
> so i could integrated IP-Core and i m now also able to generate the 
> Bitstream.
>  
> now i m trying to go to the software Tasks and to use SDK.
> to handle the Data coming from a Computer via Ethernet...
>  
> before i start SDK, i tried to " Generate Libraries and BSPs" then i got 
> the following Error:
>  Running DRCs for OSes, Drivers and Libraries ...
> MFS DRC ...
> ERROR:MDT - issued from TCL procedure 
> "::sw_xilfatfs_v1_00_a::xilfatfs_drc" line
>    15
>     xilfatfs () - Sysace HW module not present or not accessible from this
>    processor. FATfs cannot be used without this module
> Runnning DRC for lwIP library...
> ERROR:MDT - issued from TCL procedure "::sw_lwip_v3_00_a::lwip_drc" line 12
>     lwip () - No Ethernet MAC cores are addressable from processor 
> microblaze_i.
>     lwIP requires atleast one EMAC (xps_ethernetlite | xps_ll_temac) core.
> ERROR:MDT - Error while running DRC for processor microblaze_i...
> make: *** [microblaze_i/lib/libxil.a] Error 2
> Done!
>  
> the Same Error apears when i try "Build all User Applications".
>  
> i supposed that i made something wron when i integrated the Costum IP-Core.
> so i donwload again the Same Project: sz030-20071019.zip
> from the Same Location:
> http://suzaku-en.atmark-techno.com/downloads/all/&dir=/fpga_proj/9.1i/sz030 
> <http://suzaku-en.atmark-techno.com/downloads/all/&dir=/fpga_proj/9.1i/sz030>
>  
> and i tried to do the same: to see if i did somthing wrong, so i tried " 
> Generate Libraries and BSPs" then i got many ather Errors that i can't 
> really understand:
>  
> ERROR:MDT - xget_value 37816216 iplist : An invalid handle type was provided
> ERROR:MDT - intc () -
>        while executing
>    "xget_value $driver_handle "iplist""
>        (procedure "xget_sw_iplist_for_driver" line 2)
>        invoked from within
>    "xget_sw_iplist_for_driver $driver_handle"
>        (procedure "xget_periphs" line 2)
>        invoked from within
>    "xget_periphs $drvhandle"
>        (procedure "xfind_instance" line 3)
>        invoked from within
>    "xfind_instance $drv $source_name($i)"
>        (procedure "xredefine_intc" line 45)
>        invoked from within
>    "xredefine_intc $drv_handle $file_handle"
>        (procedure "xdefine_canonical_xpars" line 41)
>        invoked from within
>    "xdefine_canonical_xpars $drv_handle "xparameters.h" "Intc" "DEVICE_ID"
>    "C_BASEADDR" "C_HIGHADDR" "KIND_OF_INTR""
>        (procedure "::sw_intc_v1_10_c::generate" line 28)
>        invoked from within
>    "::sw_intc_v1_10_c::generate 38250300"
> Copying Library Files ...
> ERROR:MDT - Error while running "generate" for processor microblaze_i...
> make: *** [microblaze_i/lib/libxil.a] Error 2
>  
> the same happend when i try : "Build all User Applications"
>  
Open mss file.
and check "opb_intc" driver version.
Probably you are using 1.10.c.
Please change it 1.10.c -> 1.00.c.

The project for 9.2i is being produced now.
please wait a little...

> is there someone can Help me.
> is the Same Problem with EDK9.1i or not?
>  
> Best Regards
> Aziz


-- 
mio



More information about the suzaku-en mailing list