[Suzaku:00223] Re: More on FLASH
Shakith D. Fernando
email@hidden
2005年 1月 12日 (水) 14:52:57 JST
Thanks for the reply
By any chance do you have the English version of the lbplayer manual fnd at
http://www.inrevium.jp/data/TE7720PF/LBPlayer20.pdf
DQ5 error has come up everytime while using cat command to the fpga are
using the bin file.
I shall try the converted bin file and get back to you.
Best Regards
Shakith
----- Original Message -----
From: "Yasushi SHOJI" <email@hidden>
To: "SUZAKU general discussion list" <email@hidden>
Sent: Wednesday, January 12, 2005 1:09 PM
Subject: [Suzaku:00222] Re: More on FLASH
> At Tue, 11 Jan 2005 15:49:20 +0800,
> Shakith D. Fernando wrote:
> >
> > I tried programming it using the bin file generated from ISE tools.
> > it sill gives the same error.
> > DQ5 raised while program operation was in progress, however operation
completed OK
> > Once rebooted, the SUZAKU board stops functioning.
>
> Xilinx document says that bin file is bit file - header, but it
> doesn't seems so.
>
> so writing bit file to flash memory doesn't work. you have to
> manually remove the header from bit file and write it to the flash
> memory.
>
> you can also use lbplay2.exe to generate writedata.bin, which can be
> used by netflash writing to the flash memory.
>
> for the DQ5 message, do you get the message all the time? tell us
> little bit more about it.
>
> regards,
> --
> yashi
>
> _______________________________________________
> suzaku mailing list
> email@hidden
> http://lists.atmark-techno.com/mailman/listinfo/suzaku
>
suzaku メーリングリストの案内