[Suzaku:01089] SZ410+AD変換ボード

[森戸 誠[MORITO Makoto]]

森戸と申します。

　SUZAKU-V　SZ410とAD変換ボードの接続を行っています。

　ディストリビューションは　atmark-dist-20071018です。
　make menuconfigからAD変換ボードのドライバをA/DBoard　ソフトウェア
ニュアルｖ1.0.3の１２ページにしたがって組み込みました
　イメージファイルを作り　romに書き込んでSZ410を立ち上げたところ、次の
エラーが出て　立ち上がりません。どのように対処したらよろしいでしょうか？
　ちなみに　SZ310では　同じ方法で　AD変換ボードは使えています。


＝＝＝＝立ち上がり時のログ＝＝＝＝＝
..Copying  kernel............................done.
Linux version 2.6.18-at2 (email@hidden) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #2 Mon Dec 10 14:14:53 JST 2007
Atmark Techno SUZAKU-V SZ410
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:3
Built 1 zonelists.  Total pages: 16384
Kernel command line:
Xilinx INTC #0 at 0xF0FF3000 mapped to 0xFDFFD000
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: Xilinx OPB UART Lite
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60604k available (1636k kernel code, 2580k data, 80k init, 0k
highmem)
Calibrating delay loop... 349.18 BogoMIPS (lpj=698368)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
sid (v1.0.1) : SUZAKU I/O A/D Board Driver
Data machine check in kernel mode.
Oops: machine check, sig: 7 [#1]
NIP: C0204530 LR: C020451C CTR: 00000000
REGS: c020df50 TRAP: 0202   Not tainted  (2.6.18-at2)
MSR: 00029030 <EE,ME,IR,DR>  CR: 04000028  XER: 00000064
TASK = c04c8b70[1] 'swapper' THREAD: c04ca000
GPR00: 00000000 C04CBE90 C04C8B70 C5000000 00000000 00000000 00000000
00000000
GPR08: 00008000 C0210000 00000000 00000000 24000088 00005688 FFFFFFFF
FFFFFFFF
GPR16: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF C01A0000 C04CBF88
C01A0000
GPR24: C0210000 C01D0000 C01A0000 C01CD558 C01CD560 00000000 C01CD560
C0590F20
NIP [C0204530] sid_probe+0xb0/0x3a0
LR [C020451C] sid_probe+0x9c/0x3a0
Call Trace:
[C04CBE90] [C020451C] sid_probe+0x9c/0x3a0 (unreliable)
[C04CBEC0] [C00F191C] driver_probe_device+0x12c/0x140
[C04CBEE0] [C00F1AE8] __driver_attach+0xe8/0x120
[C04CBF00] [C00F108C] bus_for_each_dev+0x5c/0xa0
[C04CBF30] [C00F1754] driver_attach+0x24/0x40
[C04CBF40] [C00F0BB0] bus_add_driver+0x90/0x170
[C04CBF60] [C00F1DF8] driver_register+0x78/0xd0
[C04CBF70] [C020446C] sid_init+0x3c/0x50
[C04CBF80] [C0002408] init+0x88/0x2c0
[C04CBFF0] [C00053FC] kernel_thread+0x44/0x60
Instruction dump:
90bf0098 4be2361d 2f830000 419e0210 807f0094 809f0098 4be07c59 2f830000
907f0090 419e021c 7c0004ac 800300fc <0c000000> 4c00012c 3c60c01b 541e043e
Kernel panic - not syncing: Attempted to kill init!
 <0>Rebooting in 180 seconds..