[Suzaku:01580] Re: SUZAKU AVボードについて

mizo email@hidden
2009年 8月 12日 (水) 15:29:58 JST


溝渕です。

Masayuki OKADA wrote:
> 指示された通りに4項目チェックし、再度フラッシュメモリを
> 書き換えたのですが、駄目でした。
PCのwebブラウザに表示されるdemo-avの画面で、Displayボタンを押下するとど
うなりますか?

また、demo-imposeも同様に動きませんか?

> 起動画面のデータも送ります。
> 
> Linux version 2.6.18-at11 (email@hidden) (gcc version 4.1.2 20061115
> (prerelease) (Debian 4.1.1-21)) #1 Thu Mar 19 16:46:32 JST 2009
> Atmark Techno SUZAKU-V SZ410
> On node 0 totalpages: 16384
>   DMA zone: 16384 pages, LIFO batch:3
> Built 1 zonelists.  Total pages: 16384
> Kernel command line:
> Xilinx INTC #0 at 0xF0FF3000 mapped to 0xFDFFD000
> PID hash table entries: 512 (order: 9, 2048 bytes)
> Console: Xilinx OPB UART Lite
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Memory: 56192k available (1816k kernel code, 6824k data, 80k init, 0k
> highmem)
> Calibrating delay loop... 349.18 BogoMIPS (lpj=698368)
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> NET: Registered protocol family 2
> IP route cache hash table entries: 512 (order: -1, 2048 bytes)
> TCP established hash table entries: 2048 (order: 1, 8192 bytes)
> TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
> TCP: Hash tables configured (established 2048 bind 1024)
> TCP reno registered
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> i2c-suzaku: i2c SUZAKU driver, (C) 2008 Atmark Techno, Inc.
> adv71xx: ADV71xx driver, (C) 2008 Atmark Techno, Inc.
> siv (v1.0.0) : SUZAKU I/O AV Board Video Driver
>   OPB-SIV00 (id: 0x5007; ver: 0x100b)
> fb0: siv frame buffer device
> fb1: siv frame buffer device
> fb2: siv frame buffer device
> ttyS0 at MMIO 0xf0ff2000 (irq = 3) is a Xilinx OPB UART Lite
> loop: loaded (max 8 devices)
> XTemac: using FIFO direct interrupt driven mode.
> XTemac: set MDIO divisor 17.
> XTemac: PHY detected at address 31.
> eth0: Xilinx TEMAC #0 at 0xF2000000 mapped to 0xF2000000, irq=2
> Suzaku MTD mappings:
>   Flash 0x800000 at 0xf0000000
> flash: Found an alies 0x800000 for the chip at 0x0, ST M25P64 device detect.
> Creating 7 MTD partitions on "flash":
> 0x00000000-0x00800000 : "Flash/All"
> 0x00000000-0x00100000 : "Flash/FPGA"
> 0x00100000-0x00120000 : "Flash/Bootloader"
> 0x007f0000-0x00800000 : "Flash/Config"
> 0x00120000-0x007f0000 : "Flash/Image"
> 0x00120000-0x00420000 : "Flash/Kernel"
> 0x00420000-0x007f0000 : "Flash/User"
> FLASH partition type: spi
> Attached ROMFS: RAM probe address=0xc065c0ec size=0x227000
> Attached ROMFS: set ROMfs to be root filesystem
> tlv320aic: TI TLV320AIC Audio codec driver [Rev.1], (C) 2007 Atmark Techno,
> Inc.
> Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22
> 13:55:50 2006 UTC).
> sia (v1.0) : SUZAKU I/O AV Board Audio Driver
>   OPB-SIA00 (id: 0x5008; ver: 0x100b)
> ALSA device list:
>   #0: sia
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> VFS: Mounted root (romfs filesystem) readonly.
> Freeing unused kernel memory: 80k init
> init started:  BusyBox v1.00 (2009.03.19-07:46+0000) multi-call binary
> Mounting proc:
> Mounting var:
> Populating /var:
> Running local start scripts.
> Mounting /etc/config:
> Populating /etc/config:
> flatfsd: Created 4 configuration files (336 bytes)
> Setting hostname:
> Setting up interface lo:
> Starting DHCP client:
> eth0: XTemac: Options: 0xb8f2
> Starting inetd:
> Starting thttpd:
> 
> SUZAKU-V.SZ410-SIV login: eth0: XTemac: speed set to 100Mb/s
> 
> 
> 
> 溝渕です。
> 
> Masayuki OKADA wrote:
>> SZ410-U00とAVボードの組み合わせです。
>>
>> イメージファイルは、
>>
>> fpga-sz410-siv-101i-20090427.bin
>>
>> image-sz410-siv_atmark-dist-20090318_linux-2.6.18-at11.bin
>>
>> でフラッシュメモリに書き込みました。
>>
>> Demo-avでカメラ画像を表示させたいのですが、
>>
>> 設定当初は、画像表示していました。
>>
>> そこで、一旦固定IPアドレスにするために、
>>
>> イメージファイルを入れ替えたところ表示しなくなりました。
> このときに何を修正したかを詳しく教えていただけますか?
> 
>> 上記ファイルの書き換えても駄目でした。
> "上記ファイル"というのは、
> image-sz410-siv_atmark-dist-20090318_linux-2.6.18-at11.bin[1]
> のことでしょうか?
> 
> もしそうであれば以下4つの項目を確認してみてください。
> 1. linuxが起動するかどうか(イメージの書き換えに失敗していないか)
> 2. FPGAイメージは書き換えていないか(fpga-sz410-siv-101i-20090427.bin[2]
> が書き込まれているか)
> 3. ハードウェア(カメラ)の接続を変えていないか
> 4. PC上のwebブラウザからdemo-avのトップ画面は表示されているか(SZ410のIP
> アドレスは適切に設定されているか)
> 
> そうでなければ、再度image-sz410-siv_atmark-dist-20090318_linux-2.6.18-
> at11.binをフラッシュメモリに書き込んで動作確認をしていただけますか?
> 
> [1]http://suzaku.atmark-techno.com/files/downloads/suzaku-io-boards/av/image
> /image-sz410-siv_atmark-dist-20090318_linux-2.6.18-at11.bin
> [2]http://suzaku.atmark-techno.com/files/downloads/suzaku-io-boards/av/image
> /fpga-sz410-siv-101i-20090427.bin
> 
>> カメラは、動作は確認しています。以上ありません。
>>
>> 原因は、何でしょうか。
> 
> _______________________________________________
> suzaku mailing list
> email@hidden
> http://lists.atmark-techno.com/cgi-bin/mailman/listinfo/suzaku
> 
> _______________________________________________
> suzaku mailing list
> email@hidden
> http://lists.atmark-techno.com/cgi-bin/mailman/listinfo/suzaku



suzaku メーリングリストの案内