[Suzaku:01908] Re: IPコアの合成

mio email@hidden
2010年 8月 19日 (木) 17:21:59 JST


中島です。

とりあえず、コメントできるところだけ・・・。

ちなみに、何も変更をしていない
opb_siv00_v1_00_cは追加することできますか?

(2010/08/18 18:07), gs09055 wrote:
> 谷敷です。連投すいません。
> 
> ucfファイルなどに記述漏れがあった状態でGenerateNetlistしていたようです。
> 
> 新たにsz130-20090319を展開し、
> opb_siv00_v1_00_cに付属していたpdfを参考にmhs,mss,ucfを書き換えて
> GenerateNetlistを行い、
> 生成されたxps_proj_stubをtopと名前を変えてISEでプロジェクト作成し、
> xmpとucfを追加してGenerateProgramingFileを行ないました。
> 
> 現在一通りの追加を行ったところ、
> OPB_IPIFとUser_Logicのインスタンス以外は追加してもGenerateProgramingFile
> できます
> 
> OPB_IPIFだけだと
> --Place:866 - Not enough valid sites to place the following IOBs:
> IO Standard: Name = LVCMOS25, VREF = NR, VCCO = 2.50, TERM = NONE
> Sl_DBus<0>,<1>・・・・・
> のエラー
> 
これはたぶん、外部に出力しようとしているけど、UCFに記述がないからエラー
なのではないかと思います。

> User_Logicだけだと
> ERROR:Place:836 - Not enough free sites available for the components of
> the following type(s).
> IOB Number of Components 71 Number of Sites 59
> 
> 両方だと
> ERROR:Pack:2309 - Too many bonded comps of type "IOB" found to fit this
> device.
> ERROR:Pack:18 - The design is too large for the given device and package.
> Please check the Design Summary section to see which resource requirement
> for your design exceeds the resources available in the device.
> というエラーメッセージが出ます。
>
SZ130のI/Oリソースがたりなくなってしまったようにみえます。
今追加しようとしているIPコアは結構大きいものなのでしょうか?


> また、GenerateProgramingFileが通った時でも、
> UpdateBitstreamをすると、
> ERROR:EDK - Error while running "make -f xps_proj.make init_bram"
> ERROR: Bitstream update failed,
> XPS did not generate C:/suzaku/sz130-20090319-2/implementation/download.bit
> というエラーメッセージが出ます。
> 




suzaku メーリングリストの案内