[Suzaku:01925] Re: はじめまして。購入前のご相談でございます。

weider email@hidden
2010年 8月 24日 (火) 16:50:35 JST


 いつも大変お世話になっております。SUZAKU-Sスタータキットを購入しP207の”Hello
Suzaku”の表示が出ないのでございます。中島様のご指摘をチェックいたしまして1つだ
け気になっております。標準出力へ出力する関数名なのですがprintfでなくprintでよろしい
のでしょうか。僭越でございますが下記にDownload Bitstreamをクリックしたときのコンソ
ールの内容を記させていただきました。ご支援お願い申し上げます。

Consoleの表示
---------------------------------------------------------------------------------------------
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream
   stored in memory,
   but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s1200e successfully.
Maximum TCK operating frequency for this device chain: 10000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': Programming device...
done.
'1': Reading status register contents...
CRC error                                         :         0
Decryptor security set                            :         0
DCM locked                                        :         1
DCI matched                                       :         1
legacy input error                                :         0
status of GTS_CFG_B                               :         1
status of GWE                                     :         1
status of GHIGH                                   :         1
value of MODE pin M0                              :         1
value of MODE pin M1                              :         1
value of MODE pin M2                              :         1
value of CFG_RDY (INIT_B)                         :         1
DONEIN input from DONE pin                        :         1
IDCODE not validated while trying to write FDRI   :         0
write FDRI issued before or after decrypt operation:         0
Decryptor keys not used in proper sequence        :         0
'1': Programmed successfully.
Elapsed time =      1 sec.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0111 1111 1000 0000 0000 0000 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT - '1': Programing completed successfully.
INFO:iMPACT - '1': Checking done pin....done.
Done!
---------------------------------------------------------------------------------------------------------------
寺内 隆男
email@hidden


10/08/24 mio <email@hidden>:
> 中島です。
>
> 以下確認してください。
>
>  - UCFファイルに間違いはないですか?
>  - ハイパーターミナルの設定に間違いはないですか?
>  - Hello SUZAKUを表示するソースコードに間違いはないですか?
>  - BRAMにかきこんでいるプログラムに間違いはないですか(Mark to Initialize
> BRAMsにチェックがはいっている)?
>  - 書き込みは失敗していないですか(エラーがでていませんか)?
>
> (2010/08/24 12:05), weider wrote:
>> いつも大変お世話になっております。SUZAKU-Sスタータキットを購入しP207の”Hello
>>   Suzaku”の表示が出ないのでございます。中島様のご支援によりましてbitファイルの
>> 生成、ダウンロード、COMポートの確認と設定(P55を参照)、bitgen.utファイルの修正
>> を行っております。ターミナルソフトはハイパーターミナルでございます。ご支援お願い申
>> し上げます。
>>
>> 寺内 隆男
>> email@hidden
>
> _______________________________________________
> suzaku mailing list
> email@hidden
> http://lists.atmark-techno.com/cgi-bin/mailman/listinfo/suzaku
>



suzaku メーリングリストの案内