[Armadillo:05076] 440 の Android の Howto に関して
tnaka
email@hidden
2010年 4月 12日 (月) 08:20:46 JST
竹之下様
このたび入会しました中村と申します。
初めてこのメーリングリストに投稿しますので、
まだ勝手がわからず、このようなメールの出し方でいいのかわかりませんが、
とりあえずよろしくお願い致します。
（竹之内様がアットマークテクノ社の方だと想定して、アットマークテクノ社へ
の質問という趣旨でこのメールを書かせていただいています）
内容は、以下の竹之下様のメールに関する件です。
>竹之下です。
>Armadillo-440 で Android を動作させる Howto を公開しました。
>http://armadillo.atmark-techno.com/howto/try-android-on-armadillo440
440をAndroid目的で購入していたので、早速やってみました。(440はS/N 002091)
そうしたら”5. Anrdoidを起動する”のところで以下のようなログが出てうまく
いきませんでした。
（全体のログは最後に添付します）
[email@hidden (ttymxc1) ~]# killall Xfbdev
[email@hidden (ttymxc1) ~]# mount /dev/mmcblk0p2 /mnt/
kjournald starting. Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[email@hidden (ttymxc1) ~]# chroot /mnt/android/init
chroot: cannot change root directory to /mnt/android/init: Not a directory
[email@hidden (ttymxc1) ~]#
上記ログが出てうまく行かない原因がわかれば教えていただきたいのですが、
関連して以下の質問があります。
(1)Howto(Armadillo-440 で Android を使ってみる）の中の最初の方の
"Armadillo-440
液晶モデル Android ダウンロード”
にある"Linuxカーネルパッチ (ver 20100409) "のことが、"4. カーネルを書き
換える"のところで何も書かれていません。
このパッチはどう扱うべきなのでしょうか？
(2) "6. Android を自動的に起動させる"の中で、以下の記述があります。
killall Xfbdev
mount /dev/mmcblk0p2 /mnt/
chroot /mnt/android /init
これに対応すると思われる "5. Anrdoidを起動する” には「mount
/dev/mmcblk0p2 /mnt/
」の部分ありません。
この違いは何か意味があるのでしょうか？(ちなみに私はLinux初心者でコマ
ンドはまだ余りよくわかっていません）
ただし、「mount /dev/mmcblk0p2 /mnt/」有り無しの両方でやってみました
が、結果は変わりませんでした。
そのため、最後に添付してある全体ログは、1回目に「mount /dev/mmcblk0p2
/mnt/
」なしでやってみて、
２回目に「mount /dev/mmcblk0p2 /mnt/」付きでやってみた2回目の方のログ
です。
なお、2回目はmicroSDカードをフォーマットしてやり直しています。
(3)これは質問ではないのですが、"3. Anrdoid ユーザーランドを microSD にコ
ピーする”と、"4. カーネルを書き換える"に
おいて、以下の2行は、行の後ろの方が見えなくなっています。
[armadillo /mnt]# wget
http://armadillo.atmark-techno.com/files/downloads/misc/android
・・・
[armadillo ~]# netflash -nkusr /dev/flash/kernel
http://armadillo.atmark-techno.com/files
・・・
初心者はこのようなところでも戸惑ってしまいます。("4. カーネルを書き換え
る"おいては、更に前述の"Linuxカーネルパッチ
(ver 20100409) "のことが何も書かれていないので、余計にわからなくなった
）
armadilloも低価格化して頂いて、初心者も入りやすくなると思うので、細かい
技術的な解説までは各人のレベルが
違うと思うので難しいと思いますが、上記のような記述の不完全さなどに対し
ては今後ご配慮いただけたらと思います。
以上よろしくお願い致します。
[全体ログ]
Hermit-At v2.0.0 (armadillo4x0) compiled at 23:03:08, Mar 08 2010
Uncompressing
kernel.....................................................................
........................................done.
Uncompressing
ramdisk.....................................................................
..........................................................................................
....
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
...............................................................................done.
Linux version 2.6.26-at7 (2.6.26) (email@hidden) (gcc version 4.3.2
(Debian 4.3.2-1.1) ) #3 PREEMPT Fri Apr 9 19:17:05 JST 2010
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177
Machine: Armadillo-440
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttymxc1,115200
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 2048 bytes)
MXC GPT timer initialized, rate = 12000000
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 99008KB available (3200K code, 683K data, 132K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 480 bytes
NET: Registered protocol family 16
MXC WDOG1 Enabled
CPU is i.MX25 Revision 1.0
Clock input source is 24000000
MXC GPIO hardware
Using SDMA I.API
MXC DMA API initialized
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
MXC I2C driver
MXC I2C driver
MC34704 regulator successfully probed
mc34704 0-0054: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks
like an initrd
Freeing initrd memory: 26797K
usb: Host 2 host (serial) registered
usb: DR host (utmi) registered
ashmem: initialized
msgmni has been set to 245
io scheduler noop registered
io scheduler cfq registered (default)
mx2fb: Unable to set clock to 0
_wait_for_pan_complete: wait for pan complete timeout DISP0 BG
Console: switching to colour frame buffer device 60x34
mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully.
mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully.
Serial: MXC Internal UART driver
mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
console [ttymxc1] enabled
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
mxcintuart.4: ttymxc4 at MMIO 0x5002c000 (irq = 40) is a Freescale MXC
brd: module loaded
loop: module loaded
FEC Ethernet Driver
PPP generic driver version 2.4.2
Driver 'sd' needs updating - please use bus_type methods
armadillo-nor: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
armadillo-nor: use default partitions(4)
Creating 4 MTD partitions on "armadillo-nor":
0x00000000-0x00020000 : "nor.bootloader"
0x00020000-0x00220000 : "nor.kernel"
0x00220000-0x01fe0000 : "nor.userland"
0x01fe0000-0x02000000 : "nor.config"
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 35, io mem 0x53ff4400
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 37, io mem 0x53ff4000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
rtc-s353xxa 2-0030: rtc core: registered rtc-s353xxa as rtc0
rtc-s353xxa: S-353XXA Real Time Clock class driver, (C) 2008 Atmark Techno,
Inc.
i2c /dev entries driver
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 159 irq 9 INTERNAL DMA
Registered led device: red
Registered led device: green
Registered led device: yellow
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
i.MX ADC at 0x50030000 irq 46
Advanced Linux Sound Architecture Driver Version 1.0.16.
ASoC version 0.13.2
wm8978: WM8978 Audio Codec v0.2
asoc: WM8978 HiFi <-> imx-i2s-1 mapping ok
ALSA device list:
#0: armadillo440 (WM8978)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Static Power Management for Freescale i.MX25
input: imx_adc_ts as /devices/virtual/input/input1
i.MX ADC input touchscreen loaded.
rtc-s353xxa 2-0030: setting system clock to 2010-03-18 01:36:33 UTC
(1268876193)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 26797KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 132K
mmc0: new high speed SD card at address 0002
mmcblk0: mmc0:0002 00000 1993728KiB
mmcblk0: p1
init started: BusyBox v1.00 (2010.03.11-11:31+0000) multi-call binary
Starting fsck for root filesystem.
fsck 1.25 (20-Sep-2001)
ext2fs_check_if_mount: No such file or directory while determining whether
/dev/ram0 is mounted.
/dev/ram0: clean, 1039/1248 files, 24153/26797 blocks
Checking root filesystem: done
Remounting root rw: done
Mounting proc: done
Mounting usbfs: done
Mounting sysfs: done
Cleaning up system: done
Running local start scripts.
Starting udevd: done
Loading /etc/config: done
Changing file permissions: done
Configure /home/ftp: done
Starting syslogd: done
Starting klogd: done
Starting basic firewall: done
Setting hostname: done
Configuring network interfaces: udhcpc (v0.9.9-pre) started
fec: PHY @ 0x0, ID 0x0007c0f1 -- LAN8720
eth0: link down
Sending discover...
reth0: link up, 100Mbps, full-duplex
Sending discover...
Sending select for 192.168.11.4...
Lease of 192.168.11.4 obtained, lease time 172800
done
Starting inetd: done
Setting at-cgi: done
Starting lighttpd: done
Creating avahi.services: done
Starting avahi.daemon: done
Starting Xfbdev: done
Mounting ramfs /home/ftp/pub: done
Running local start script (/etc/config/rc.local).
Starting functester: done
atmark-dist v1.25.0 (AtmarkTechno/Armadillo-440)
Linux 2.6.26-at7 [armv5tejl arch]
armadillo440-0 login: root
Password:
[email@hidden (ttymxc1) ~]# fdisk /dev/mmcblk0
The number of cylinders for this disk is set to 1089.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): d
Selected partition 1
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1089, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-1089, default 1089): +100M
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (55-1089, default 55):
Using default value 55
Last cylinder or +size or +sizeM or +sizeK (55-1089, default 1089):
Using default value 1089
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
mmcblk0: p1 p2
mmcblk0: p1 p2
Syncing disks.
[email@hidden (ttymxc1) ~]# mkdosfs /dev/mmcblk0p1
mkdosfs 2.11 (12 Mar 2005)
[email@hidden (ttymxc1) ~]# mke2fs -j /dev/mmcblk0p2
mke2fs 1.25 (20-Sep-2001)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
237120 inodes, 473512 blocks
23675 blocks (4%) reserved for the super user
First data block=0
15 block groups
32768 blocks per group, 32768 fragments per group
15808 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180.00 days, whichever comes first. Use tune2fs -c or -i to override.
[email@hidden (ttymxc1) ~]# mount /dev/mmcblk0p2 /mnt/
kjournald starting. Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[email@hidden (ttymxc1) ~]# cd /mnt/
[email@hidden (ttymxc1) /mnt]# wget
http://armadillo.atmark-techno.com/files/downloads/misc/android/android-2.0.1-a440-20100409.tar.gz
--10:45:01--
http://armadillo.atmark-techno.com/files/downloads/misc/android/android-2.0.1-a440-20100409.tar.gz
=> `android-2.0.1-a440-20100409.tar.gz'
Resolving armadillo.atmark-techno.com... 210.191.215.172
Connecting to armadillo.atmark-techno.com[210.191.215.172]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 39,946,320 [application/x-gzip]
100%[====================================>] 39,946,320 710.78K/s ETA
00:00
10:45:56 (708.00 KB/s) - `android-2.0.1-a440-20100409.tar.gz' saved
[39946320/39946320]
[email@hidden (ttymxc1) /mnt]# tar xzf
android-2.0.1-a440-20100409.tar.gz[email@hidden (ttymxc1) /mnt]# ls
android/ lost+found/
android-2.0.1-a440-20100409.tar.gz
[email@hidden (ttymxc1) /mnt]# cd
[email@hidden (ttymxc1) ~]# netflash -nkusr /dev/flash/kernel
http://armadillo.atmark-techno.com/files/downloads/misc/android/linux-a400-android-20100409.bin.gz
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
...........................................................................................................
netflash: got
"http://armadillo.atmark-techno.com/files/downloads/misc/android/linux-a400-android-20100409.bin.gz",
length=1733714
netflash: programming FLASH device /dev/flash/kernel
..............
Restarting system.
Hermit-At v2.0.0 (armadillo4x0) compiled at 23:03:08, Mar 08 2010
Uncompressing
kernel.............................................................................................................done.
Uncompressing
ramdisk...................................................................................................................................................................................................................................................................................................
..........................................................................................................................................................................................................................................................................................................
.........................................................................................................................................................................................................................................................done.
Linux version 2.6.26-at7 (2.6.26) (email@hidden) (gcc version 4.3.2
(Debian 4.3.2-1.1) ) #3 PREEMPT Fri Apr 9 19:17:05 JST 2010
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177
Machine: Armadillo-440
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttymxc1,115200
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 2048 bytes)
MXC GPT timer initialized, rate = 12000000
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 99008KB available (3200K code, 683K data, 132K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 480 bytes
NET: Registered protocol family 16
MXC WDOG1 Enabled
CPU is i.MX25 Revision 1.0
Clock input source is 24000000
MXC GPIO hardware
Using SDMA I.API
MXC DMA API initialized
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
MXC I2C driver
MXC I2C driver
MC34704 regulator successfully probed
mc34704 0-0054: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks
like an initrd
Freeing initrd memory: 26797K
usb: Host 2 host (serial) registered
usb: DR host (utmi) registered
ashmem: initialized
msgmni has been set to 245
io scheduler noop registered
io scheduler cfq registered (default)
mx2fb: Unable to set clock to 0
_wait_for_pan_complete: wait for pan complete timeout DISP0 BG
Console: switching to colour frame buffer device 60x34
mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully.
mxc_sdc_fb mxc_sdc_fb.0: fb1: DISP0 FG fb device registered successfully.
Serial: MXC Internal UART driver
mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
console [ttymxc1] enabled
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
mxcintuart.4: ttymxc4 at MMIO 0x5002c000 (irq = 40) is a Freescale MXC
brd: module loaded
loop: module loaded
FEC Ethernet Driver
PPP generic driver version 2.4.2
Driver 'sd' needs updating - please use bus_type methods
armadillo-nor: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
armadillo-nor: use default partitions(4)
Creating 4 MTD partitions on "armadillo-nor":
0x00000000-0x00020000 : "nor.bootloader"
0x00020000-0x00220000 : "nor.kernel"
0x00220000-0x01fe0000 : "nor.userland"
0x01fe0000-0x02000000 : "nor.config"
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 35, io mem 0x53ff4400
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 37, io mem 0x53ff4000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
rtc-s353xxa 2-0030: rtc core: registered rtc-s353xxa as rtc0
rtc-s353xxa: S-353XXA Real Time Clock class driver, (C) 2008 Atmark Techno,
Inc.
i2c /dev entries driver
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 159 irq 9 INTERNAL DMA
Registered led device: red
Registered led device: green
Registered led device: yellow
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
i.MX ADC at 0x50030000 irq 46
Advanced Linux Sound Architecture Driver Version 1.0.16.
ASoC version 0.13.2
wm8978: WM8978 Audio Codec v0.2
asoc: WM8978 HiFi <-> imx-i2s-1 mapping ok
ALSA device list:
#0: armadillo440 (WM8978)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Static Power Management for Freescale i.MX25
input: imx_adc_ts as /devices/virtual/input/input1
mmc0: new high speed SD card at address 0002
mmcblk0: mmc0:0002 00000 1993728KiB
mmcblk0: p1 p2
i.MX ADC input touchscreen loaded.
rtc-s353xxa 2-0030: setting system clock to 2010-03-18 01:50:50 UTC
(1268877050)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 26797KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 132K
init started: BusyBox v1.00 (2010.03.11-11:31+0000) multi-call binary
Starting fsck for root filesystem.
fsck 1.25 (20-Sep-2001)
ext2fs_check_if_mount: No such file or directory while determining whether
/dev/ram0 is mounted.
/dev/ram0: clean, 1039/1248 files, 24153/26797 blocks
Checking root filesystem: done
Remounting root rw: done
Mounting proc: done
Mounting usbfs: done
Mounting sysfs: done
Cleaning up system: done
Running local start scripts.
Starting udevd: done
Loading /etc/config: done
Changing file permissions: done
Configure /home/ftp: done
Starting syslogd: done
Starting klogd: done
Starting basic firewall: done
Setting hostname: done
Configuring network interfaces: udhcpc (v0.9.9-pre) started
fec: PHY @ 0x0, ID 0x0007c0f1 -- LAN8720
Sending discover...
eth0: link down
eth0: link up, 100Mbps, full-duplex
Sending discover...
Sending select for 192.168.11.4...
Lease of 192.168.11.4 obtained, lease time 172800
done
Starting inetd: done
Setting at-cgi: done
Starting lighttpd: done
Creating avahi.services: done
Starting avahi.daemon: done
Starting Xfbdev: done
Mounting ramfs /home/ftp/pub: done
Running local start script (/etc/config/rc.local).
Starting functester: done
atmark-dist v1.25.0 (AtmarkTechno/Armadillo-440)
Linux 2.6.26-at7 [armv5tejl arch]
armadillo440-0 login: root
Password:
[email@hidden (ttymxc1) ~]# killall Xfbdev
[email@hidden (ttymxc1) ~]# mount /dev/mmcblk0p2 /mnt/
kjournald starting. Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[email@hidden (ttymxc1) ~]# chroot /mnt/android/init
chroot: cannot change root directory to /mnt/android/init: Not a directory
[email@hidden (ttymxc1) ~]#
以上
--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/
armadillo メーリングリストの案内