[Armadillo:04910] Re: 500FX DebianでのX
f-saki
email@hidden
2010年 1月 23日 (土) 17:03:37 JST
藤咲です．
タッチパネルがクリックできない現象のままですが，
xevを実行するとButtonイベントは発生しているようです．
ですが，PressとReleaseが逆のような気がします．
すばやくタッチしても，ゆっくりタッチしてもReleaseから始まるので
これが原因ではないかと，思っています．
これが本当の原因であるかはわかりませんが，何か解決につながりそうなことを
ご存知でしたら教えていただければ嬉しいです．
debian:~# xev -display :0.0
MotionNotify event, serial 20, synthetic NO, window 0xa00001,
root 0x3a, subw 0x0, time 592259553, (93,105), root:(95,107),
state 0x0, is_hint 0, same_screen YES
ButtonRelease event, serial 20, synthetic NO, window 0xa00001,
root 0x3a, subw 0x0, time 592259553, (93,105), root:(95,107),
state 0x0, button 75, same_screen YES
ButtonPress event, serial 20, synthetic NO, window 0xa00001,
root 0x3a, subw 0x0, time 592259553, (93,105), root:(95,107),
state 0x0, button 75, same_screen YES
MotionNotify event, serial 20, synthetic NO, window 0xa00001,
root 0x3a, subw 0x0, time 592259563, (98,61), root:(100,63),
state 0x0, is_hint 0, same_screen YES
MotionNotify event, serial 20, synthetic NO, window 0xa00001,
root 0x3a, subw 0x0, time 592259573, (102,56), root:(104,58),
state 0x0, is_hint 0, same_screen YES
藤咲
(2010/01/22 19:23), f-saki wrote:
> 藤咲です．
>
> 度々すみません．
>
> タッチパネル上でカーソルを操作できたので出来上がったと思い上がってしまっ
> てクリックが効いてないことに後で気づいてしまいました．
>
> synapticsを使うのだろうとおもい，調べつつ設定していたのですが，
> 行き詰まってしまいました．
>
> 何かご存知でしたら，教えていただけると助かります．
>
>
> debian:/etc/X11# cat xorg.conf
> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool, using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
> # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # If you have edited this file but would like it to be automatically updated
> # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "Files"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/X11R6/lib/X11/fonts/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
> # path to defoma fonts
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> Section "Module"
> Load "bitmap"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "int10"
> Load "vbe"
> Load "synaptics"
> EndSection
>
> #Section "InputDevice"
> # Identifier "Generic Keyboard"
> # Driver "kbd"
> # Option "CoreKeyboard"
> # Option "XkbRules" "xorg"
> # Option "XkbModel" "pc106"
> # Option "XkbLayout" "jp"
> # Option "Device" "/dev/input/event3"
> #EndSection
>
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> # Driver "evdev"
> Driver "synaptics"
> Option "CorePointer"
> Option "Device" "/dev/input/event1"
> Option "Protocol" "Auto"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "fbdev"
> Option "UseFBDev" "true"
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> Option "DPMS"
> HorizSync 28-32
> VertRefresh 43-60
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "Generic Monitor"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> # InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
> debian:/etc/X11#
>
>
>
>
> cat /var/log/Xorg.0.log
>
> (II) Synaptics touchpad driver version 0.14.6 (1406)
> Configured Mouse no synaptics event device found (checked 13 nodes)
> (**) Option "Device" "/dev/input/event1"
> Query no Synaptics: 000000
> (EE) Configured Mouse no synaptics touchpad detected and no repeater device
> (EE) Configured Mouse Unable to query/initialize Synaptics hardware.
> (EE) PreInit failed for input device "Configured Mouse"
> (II) UnloadModule: "synaptics"
> (**) Option "CoreKeyboard"
> (**)<default keyboard>: Core Keyboard
> (**) Option "Protocol" "standard"
> (**)<default keyboard>: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**)<default keyboard>: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**)<default keyboard>: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**)<default keyboard>: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**)<default keyboard>: CustomKeycodes disabled
> (WW) No core pointer registered
> (II) XINPUT: Adding extended input device "<default keyboard>" (type:
> KEYBOARD)
> xkb_keycodes { include "xfree86+aliases(qwerty)" };
> xkb_types { include "complete" };
> xkb_compatibility { include "complete" };
> xkb_symbols { include "pc(pc105)+us" };
> xkb_geometry { include "pc(pc105)" };
> No core pointer
>
> Fatal server error:
> failed to initialize core devices
>
>
>
>
> debian:/etc/X11# startx
> xauth: creating new authority file /root/.serverauth.2188
>
> X: warning; process set to priority -1 instead of requested priority 0
>
> X Window System Version 7.1.1
> Release Date: 12 May 2006
> X Protocol Version 11, Revision 0, Release 7.1.1
> Build Operating System: UNKNOWN
> Current Operating System: Linux debian 2.6.26-at6 #5 PREEMPT Thu Jan 21
> 15:54:49 JST 2010 armv6l
> Build Date: 02 June 2008
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 12 11:46:42 2010
> (==) Using config file: "/etc/X11/xorg.conf"
> Configured Mouse no synaptics event device found (checked 13 nodes)
> Query no Synaptics: 000000
> (EE) Configured Mouse no synaptics touchpad detected and no repeater device
> (EE) Configured Mouse Unable to query/initialize Synaptics hardware.
> (EE) PreInit failed for input device "Configured Mouse"
> xkb_keycodes { include "xfree86+aliases(qwerty)" };
> xkb_types { include "complete" };
> xkb_compatibility { include "complete" };
> xkb_symbols { include "pc(pc105)+us" };
> xkb_geometry { include "pc(pc105)" };
> No core pointer
>
> Fatal server error:
> failed to initialize core devices
> XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
> after 0 requests (0 known processed) with 0 events remaining.
> debian:/etc/X11#
>
>
>
> 何度も申し訳ないですが，よろしくお願いいたします．
>
>
> 藤咲
>
>
>
>
> (2010/01/22 12:33), f-saki wrote:
>> 井町様，ご回答ありがとうございます．
>>
>> dpkg-reconfigure xserver-xorg
>> で xorg.confを 作り直したあと，
>>
>>> Driver を "mouse" から "evdev" に変更
>>> Option "Device" を "/dev/input/mice" から "/dev/input/event1" に変更
>>
>> を行いました．
>>
>> #startx
>>
>> で無事，Xが立ち上がり，タッチパッドで操作できるようになりました．
>> ありがとうございました．
>>
>> yashi様，井町様，この度は本当にありがとうございました．
>>
>>
>>
>> 藤咲
>>
>> debian:~# cat /etc/X11/xorg.conf
>> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
>> #
>> # This file was generated by dexconf, the Debian X Configuration tool, using
>> # values from the debconf database.
>> #
>> # Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
>> # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
>> #
>> # This file is automatically updated on xserver-xorg package upgrades *only*
>> # if it has not been modified since the last upgrade of the xserver-xorg
>> # package.
>> #
>> # If you have edited this file but would like it to be automatically updated
>> # again, run the following command:
>> # sudo dpkg-reconfigure -phigh xserver-xorg
>>
>> Section "Files"
>> FontPath "/usr/share/fonts/X11/misc"
>> FontPath "/usr/X11R6/lib/X11/fonts/misc"
>> FontPath "/usr/share/fonts/X11/cyrillic"
>> FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
>> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
>> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
>> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
>> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
>> FontPath "/usr/share/fonts/X11/Type1"
>> FontPath "/usr/X11R6/lib/X11/fonts/Type1"
>> FontPath "/usr/share/fonts/X11/100dpi"
>> FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
>> FontPath "/usr/share/fonts/X11/75dpi"
>> FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
>> # path to defoma fonts
>> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
>> EndSection
>>
>> Section "Module"
>> Load "bitmap"
>> Load "ddc"
>> Load "dri"
>> Load "extmod"
>> Load "freetype"
>> Load "int10"
>> Load "vbe"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Generic Keyboard"
>> Driver "kbd"
>> Option "CoreKeyboard"
>> Option "XkbRules" "xorg"
>> Option "XkbModel" "pc106"
>> Option "XkbLayout" "jp"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Configured Mouse"
>> Driver "evdev"
>> Option "CorePointer"
>> Option "Device" "/dev/input/event1"
>> Option "Protocol" "Auto"
>> EndSection
>>
>> Section "Device"
>> Identifier "Generic Video Card"
>> Driver "fbdev"
>> Option "UseFBDev" "true"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Generic Monitor"
>> Option "DPMS"
>> HorizSync 28-32
>> VertRefresh 43-60
>> EndSection
>>
>> Section "Screen"
>> Identifier "Default Screen"
>> Device "Generic Video Card"
>> Monitor "Generic Monitor"
>> DefaultDepth 16
>> SubSection "Display"
>> Depth 1
>> Modes "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 4
>> Modes "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 8
>> Modes "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 15
>> Modes "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 16
>> Modes "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 24
>> Modes "640x480"
>> EndSubSection
>> EndSection
>>
>> Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen "Default Screen"
>> InputDevice "Generic Keyboard"
>> InputDevice "Configured Mouse"
>> EndSection
>>
>> Section "DRI"
>> Mode 0666
>> EndSection
>>
>>
>>
>>
>>
>> (2010/01/22 11:06), Tomohiko IMACHI wrote:
>>> 井町といいます．
>>>
>>> xorg.conf のマウスのセクションで，
>>>
>>> Driver を "mouse" から "evdev" に変更
>>> Option "Device" を "/dev/input/mice" から "/dev/input/event1" に変更
>>>
>>> でどうでしょうか．
>>> マウス入力は USB マウスではなく，タッチスクリーンになりますが．
>>>
>>> ===========================================================
>>> 参考：$ cat /proc/bus/input/devices より抜粋
>>> -----------------------------------------------------------
>>> I: Bus=0019 Vendor=0000 Product=0000 Version=0000
>>> N: Name="mxckpd"
>>> P: Phys=
>>> S: Sysfs=/devices/virtual/input/input0
>>> U: Uniq=
>>> H: Handlers=kbd event0
>>> B: EV=3
>>> B: KEY=80 0 0 40000800 1ec0 0 78000000 10000ffc
>>>
>>> I: Bus=0000 Vendor=0000 Product=0000 Version=0000
>>> N: Name="ADS784x Touchscreen"
>>> P: Phys=spi3.1/input0
>>> S: Sysfs=/devices/platform/mxc_spi.2/spi3.1/input/input1
>>> U: Uniq=
>>> H: Handlers=event1
>>> B: EV=b
>>> B: KEY=400 0 0 0 0 0 0 0 0 0 0
>>> B: ABS=1000003
>>> ===========================================================
>>>
>>>
>>>> yashi様ご回答ありがとうございます．
>>>> USBマウスとhostsの設定をおこなってみました．
>>>>
>>>> dmesg
>>>>
>>>> input: Microsoft Basic Optical Mouse as
>>>> /devices/platform/fsl-ehci.1/usb2/2-1/2-1:1.0/input/input2
>>>> input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on
>>>> usb-fsl-ehci.1-1
>>>> usb 3-1: new low speed USB device using fsl-ehci and address 2
>>>> usb 3-1: configuration #1 chosen from 1 choice
>>>> input: USB-compliant keyboard as
>>>> /devices/platform/fsl-ehci.2/usb3/3-1/3-1:1.0/input/input3
>>>> input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-fsl-ehci.2-1
>>>> input: USB-compliant keyboard as
>>>> /devices/platform/fsl-ehci.2/usb3/3-1/3-1:1.1/input/input4
>>>> input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-fsl-ehci.2-1
>>>>
>>>> USBマウスをつないでみました，認識しているようです．
>>>> このとき，xorg.confの変更が必要でしょうか？
>>>>
>>>> debian:~# startx
>>>> xauth: creating new authority file /root/.serverauth.1488
>>>>
>>>> X: warning; process set to priority -1 instead of requested priority 0
>>>>
>>>> X Window System Version 7.1.1
>>>> Release Date: 12 May 2006
>>>> X Protocol Version 11, Revision 0, Release 7.1.1
>>>> Build Operating System: UNKNOWN
>>>> Current Operating System: Linux debian 2.6.26-at6 #5 PREEMPT Thu Jan 21
>>>> 15:54:49 JST 2010 armv6l
>>>> Build Date: 02 June 2008
>>>> Before reporting problems, check http://wiki.x.org
>>>> to make sure that you have the latest version.
>>>> Module Loader present
>>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>>> (++) from command line, (!!) notice, (II) informational,
>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 12 02:31:58 2010
>>>> (==) Using config file: "/etc/X11/xorg.conf"
>>>> (EE) xf86OpenSerial: Cannot open device /dev/input/mice
>>>> No such file or directory.
>>>> (EE) Configured Mouse: cannot open input device
>>>> (EE) PreInit failed for input device "Configured Mouse"
>>>> xkb_keycodes { include "xfree86+aliases(qwerty)" };
>>>> xkb_types { include "complete" };
>>>> xkb_compatibility { include "complete" };
>>>> xkb_symbols { include "pc(pc105)+us" };
>>>> xkb_geometry { include "pc(pc104)" };
>>>> No core pointer
>>>>
>>>> Fatal server error:
>>>> failed to initialize core devices
>>>> XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
>>>> after 0 requests (0 known processed) with 0 events remaining.
>>>> debian:~#
>>>>
>>>>
>>>> debina:0は言われなくなりました．
>>>> ありがとうございます．
>>>>
>>>> ただ，まだXはうまく動かないようです．
>>>>
>>>> 藤咲
>>>>
>>>> (2010/01/22 9:29), Yasushi SHOJI wrote:
>>>>> At Thu, 21 Jan 2010 22:31:00 +0900,
>>>>> f-saki wrote:
>>>>> [...]
>>>>>> (EE) xf86OpenSerial: Cannot open device /dev/input/mice
>>>>>> No such file or directory.
>>>>>> (EE) Configured Mouse: cannot open input device
>>>>>> (EE) PreInit failed for input device "Configured Mouse"
>>>>>> xkb_keycodes { include "xfree86+aliases(qwerty)" };
>>>>>> xkb_types { include "complete" };
>>>>>> xkb_compatibility { include "complete" };
>>>>>> xkb_symbols { include "pc(pc105)+us" };
>>>>>> xkb_geometry { include "pc(pc104)" };
>>>>>> No core pointer
>>>>> マウスが無いからとか？ usbマウスを差したら、どうなります？
>>>>>
>>>>>> Fatal server error:
>>>>>> failed to initialize core devices
>>>>>> XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
>>>>>> after 0 requests (0 known processed) with 0 events remaining.
>>>>>> xauth: (argv):1: bad display name "debian:0" in "remove" command
>>>>>> debian:~#
>>>>> こっちは、/etc/hostsの設定かな。127.0.0.1に 「debian」を追加すると良いはず。
>>>>
>>>> _______________________________________________
>>>> armadillo mailing list
>>>> email@hidden
>>>> http://lists.atmark-techno.com/cgi-bin/mailman/listinfo/armadillo
>>>>
>>>>
>>>
>>>
>>
>
armadillo メーリングリストの案内